X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8641HPCN.h;h=0e5bbc001258414eded8e03c048b797c83f46772;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=11b10bcfbe6fa6ac1930c1534206af2341baba8a;hpb=0872d443aa75c86c0ce0c3008a0ac0e0889a9821;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 11b10bc..0e5bbc0 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -17,8 +17,6 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_MPC8641		1	/* MPC8641 specific */
-#define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_MP		1	/* support multiple processors */
 #define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
 #define CONFIG_ADDR_MAP		1	/* Use addr map */
@@ -42,12 +40,10 @@
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1			/* SRIO port 1 */
 
-#define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		1	/* PCIE controller 1 (ULI bridge) */
 #define CONFIG_PCIE2		1	/* PCIE controller 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW		1	/* Use common FSL law init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -90,7 +86,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
@@ -106,7 +101,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
@@ -119,7 +113,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_NUM_DDR_CONTROLLERS	2
 #define CONFIG_DIMM_SLOTS_PER_CTLR	2
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -351,8 +344,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -361,8 +352,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  ************************************************************/
 #define CONFIG_PCI_OHCI			1
 #define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_USB_KEYBOARD		1
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL		1
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ohci_pci"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
@@ -385,7 +374,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI