X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8610HPCD.h;h=c1b9b6ef31e531312942e436b31a1231a308cb4a;hb=8f2fe0c86c56175dd7d5d0e3bc26bef41f224f03;hp=88ca4f30489d4b6a24776903faea41a20182f7f1;hpb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 88ca4f3..c1b9b6e 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -45,7 +45,7 @@
 #define CONFIG_SYS_SCRATCH_VA	0xc0000000
 
 #define CONFIG_PCI		1	/* Enable PCI/PCIE*/
-#define CONFIG_PCI1		1	/* PCI controler 1 */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
 #define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
 #define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
@@ -449,7 +449,7 @@
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #endif
 
 #define CONFIG_WATCHDOG			/* watchdog enabled */
@@ -477,7 +477,8 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN	(256 << 20)	/* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
@@ -498,9 +499,8 @@
 #define CONFIG_NETMASK		255.255.255.0
 
 /* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
+#define CONFIG_LOADADDR		0x10000000
 
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE	115200
@@ -567,9 +567,9 @@
 	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
 		" $filesize\0"	\
 "consoledev=ttyS0\0"						\
-"ramdiskaddr=2000000\0"					\
+"ramdiskaddr=0x18000000\0"					\
 "ramdiskfile=8610hpcd/ramdisk.uboot\0"				\
-"fdtaddr=c00000\0"						\
+"fdtaddr=0x17c00000\0"						\
 "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"				\
 "bdev=sda3\0"					\
 "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
@@ -605,9 +605,9 @@
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
 	"consoledev=ttyS0\0"					\
-	"ramdiskaddr=2000000\0"					\
+	"ramdiskaddr=0x18000000\0"				\
 	"ramdiskfile=8610hpcd/ramdisk.uboot\0"			\
-	"fdtaddr=c00000\0"					\
+	"fdtaddr=0x17c00000\0"					\
 	"fdtfile=8610hpcd/mpc8610_hpcd.dtb\0"			\
 	"bdev=sda3\0"
 #endif