X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8572DS.h;h=e063c7a63ae09d5abf47d405d6b8273c221539ef;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=7b63945888b16c7774f473c2a6422a20a6880960;hpb=a7e8c15f71456d55ccb27f843862af03a00e0957;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 7b63945..e063c7a 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -11,26 +11,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include "../board/freescale/common/ics307_clk.h"
-
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
+#define CONFIG_DISPLAY_BOARDINFO
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE	0xf8f82000
-#endif /* CONFIG_NAND_SPL */
-#endif
+#include "../board/freescale/common/ics307_clk.h"
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xeff80000
+#define CONFIG_SYS_TEXT_BASE	0xeff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -50,9 +36,9 @@
 
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
@@ -187,7 +173,6 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
-
 #define CONFIG_FLASH_BR_PRELIM \
 	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
@@ -205,12 +190,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
 #undef CONFIG_SYS_RAMBOOT
-#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -317,7 +297,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000,\
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE    4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
@@ -334,7 +313,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_RELOC	(CONFIG_SYS_INIT_L2_END - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 
-
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
@@ -350,17 +328,10 @@
 			       | OR_FCM_TRLX \
 			       | OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
@@ -381,13 +352,11 @@
 			       | BR_V)		       /* valid */
 #define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
-
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -401,20 +370,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/* new uImage format support */
-#define CONFIG_FIT		1
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -518,7 +473,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
@@ -526,8 +480,6 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#undef CONFIG_RTL8139
-#define CONFIG_E1000			/* Define e1000 pci Ethernet card */
 
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
@@ -550,7 +502,6 @@
 
 #endif	/* CONFIG_PCI */
 
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_MII		1	/* MII PHY management */
@@ -597,12 +548,6 @@
  */
 
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((512 * 1024)\
-				+ CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
 
 #else
 	#define CONFIG_ENV_IS_IN_FLASH	1
@@ -621,22 +566,13 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #endif
 
 /*
@@ -645,10 +581,8 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_STORAGE
 #define CONFIG_PCI_EHCI_DEVICE			0
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #endif
@@ -686,17 +620,11 @@
 /*
  * Environment Configuration
  */
-
-/* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR	00:E0:0C:02:00:FD
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
 #define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
 #endif
 
 #define CONFIG_IPADDR		192.168.1.254
@@ -713,7 +641,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE	115200
@@ -736,7 +663,7 @@
 "consoledev=ttyS0\0"				\
 "ramdiskaddr=2000000\0"			\
 "ramdiskfile=8572ds/ramdisk.uboot\0"		\
-"fdtaddr=c00000\0"				\
+"fdtaddr=1e00000\0"				\
 "fdtfile=8572ds/mpc8572ds.dtb\0"		\
 "bdev=sda3\0"