X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8572DS.h;h=c04b3a2af2cb2b6d083f684fe69ff57b5666faef;hb=5bc0543df3079add8152afa041b887d081d71839;hp=906270222a12055afc0070399b73ab2139d0d584;hpb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 9062702..c04b3a2 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -13,10 +13,6 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xeff40000
-#endif
-
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
@@ -36,7 +32,6 @@
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
@@ -58,7 +53,6 @@
 
 #define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x7fffffff
-#define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Config the L2 Cache as L2 SRAM
@@ -185,8 +179,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
-#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
-
 #define CONFIG_HWCONFIG			/* enable hwconfig */
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
@@ -343,7 +335,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -469,10 +460,8 @@
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI
-#define CONFIG_LIBATA
 #define CONFIG_SATA_ULI5288
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
 #define CONFIG_SYS_SCSI_MAX_LUN	1
@@ -519,8 +508,6 @@
 #define TSEC4_PHYIDX		0
 
 #define CONFIG_ETHPRIME		"eTSEC1"
-
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
@@ -543,20 +530,10 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-/*
  * USB
  */
 
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE			0
 #endif
@@ -566,18 +543,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -603,7 +569,7 @@
 
 #define CONFIG_IPADDR		192.168.1.254
 
-#define CONFIG_HOSTNAME		unknown
+#define CONFIG_HOSTNAME		"unknown"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
@@ -615,8 +581,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"		\
 "netdev=eth0\0"						\