X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8572DS.h;h=906270222a12055afc0070399b73ab2139d0d584;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=5ca01e847035a37ce7e996c07ad4b151362bb54a;hpb=66e399b68d20d96a90ba391d75c2290bd63bf4a5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 5ca01e8..9062702 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -28,7 +28,6 @@
 /* High Level Configuration Options */
 #define CONFIG_MP		1	/* support multiple processors */
 
-#define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
 #define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
@@ -286,7 +285,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000,\
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE    4
-#define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 #define CONFIG_SYS_NAND_MAX_OOBFREE	5
@@ -471,7 +469,6 @@
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI
@@ -533,7 +530,6 @@
 #if defined(CONFIG_SYS_RAMBOOT)
 
 #else
-	#define CONFIG_ENV_IS_IN_FLASH	1
 	#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 	#define CONFIG_ENV_ADDR	0xfff80000
 	#else
@@ -549,25 +545,20 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_SCSI
 #endif
 
 /*
  * USB
  */
-#define CONFIG_USB_EHCI
 
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE			0
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #endif
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
@@ -626,8 +617,6 @@
 
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
-#define CONFIG_BAUDRATE	115200
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"		\
 "netdev=eth0\0"						\