X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8548CDS.h;h=f7605186768d1040c13fff46040b2d65a270496b;hb=117c7ee283f1c3f49306fb11939b59fe11cbf5a8;hp=3a8c074dc55e74a63bba81b2e0d8bbac8f660385;hpb=ba83753289f5ad99f64e72fd0ee141c647aeda0f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 3a8c074..f760518 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -26,6 +27,7 @@
 #define CONFIG_FSL_VIA
 
 #ifndef __ASSEMBLY__
+#include <linux/stringify.h>
 extern unsigned long get_clock_freq(void);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_clock_freq() /* sysclk for MPC85xx */
@@ -41,14 +43,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
 #define CONFIG_SYS_CCSRBAR		0xe0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
@@ -74,7 +68,6 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required")
 #endif
 
-#undef CONFIG_CLOCKS_IN_MHZ
 /*
  * Physical Address Map
  *
@@ -304,12 +297,18 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
+#else
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
+#endif
+#define CONFIG_SYS_I2C_FSL
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -375,8 +374,6 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 #if !defined(CONFIG_DM_PCI)
 #define CONFIG_FSL_PCI_INIT		1	/* Use common FSL init code */
@@ -429,13 +426,6 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR	0xfff80000
-#else
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#endif
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K for env */
-#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */