X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8548CDS.h;h=6f3e298a2492e83a608215da17b65c8bf22053c9;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=ff02c2cd8472e4a8254ceac80b8bed37abfa5154;hpb=65cc0e2a65d2c9f107b2f42db6396d9ade6c5ad8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index ff02c2c..6f3e298 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -13,18 +13,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
-
 #ifndef __ASSEMBLY__
 #include <linux/stringify.h>
 #endif
 
 /*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-
-/*
  * Only possible on E500 Version 2 or newer cores.
  */
 
@@ -32,9 +25,6 @@
 #define CFG_SYS_CCSRBAR_PHYS_LOW	CFG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
 #define CFG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
 #define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE
@@ -122,8 +112,6 @@
 #define CFG_SYS_FLASH_BANKS_LIST \
 	{CFG_SYS_FLASH_BASE_PHYS + 0x800000, CFG_SYS_FLASH_BASE_PHYS}
 
-#define CONFIG_HWCONFIG			/* enable hwconfig */
-
 /*
  * SDRAM on the Local Bus
  */
@@ -217,8 +205,6 @@
  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
  */
 
-#define CONFIG_FSL_CADMUS
-
 #define CADMUS_BASE_ADDR 0xf8000000
 #ifdef CONFIG_PHYS_64BIT
 #define CADMUS_BASE_ADDR_PHYS	0xff8000000ull
@@ -290,33 +276,6 @@
 #endif
 #define CFG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 512M */
 
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"eTSEC1"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC2"
-#define CONFIG_TSEC4
-#define CONFIG_TSEC4_NAME	"eTSEC3"
-#undef CONFIG_MPC85XX_FEC
-
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC3_PHY_ADDR		2
-#define TSEC4_PHY_ADDR		3
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#endif	/* CONFIG_TSEC_ENET */
-
 /*
  * Miscellaneous configurable options
  */
@@ -332,20 +291,10 @@
  * Environment Configuration
  */
 
-#define CONFIG_IPADDR	 192.168.1.253
-
-#define CONFIG_HOSTNAME	 "unknown"
-#define CONFIG_ROOTPATH	 "/nfsroot"
-#define CONFIG_UBOOTPATH	8548cds/u-boot.bin	/* TFTP server */
-
-#define CONFIG_SERVERIP	 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK	 255.255.255.0
-
-#define	CONFIG_EXTRA_ENV_SETTINGS		\
+#define	CFG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:ecc=off\0"		\
 	"netdev=eth0\0"				\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"	\
+	"uboot=" CONFIG_UBOOTPATH "\0"	\
 	"tftpflash=tftpboot $loadaddr $uboot; "	\
 		"protect off " __stringify(CONFIG_TEXT_BASE)	\
 			" +$filesize; "	\