X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8540ADS.h;h=82527da431e7e6a31c07c265506f5feb3663b4a9;hb=72d81360aabd0485d3832d292bbea29c7c4554ef;hp=13ca2c395df39aecf1eb769456e66b57da2c92ca;hpb=c507d30694b88b42b9cd85967950d436bf0dd08b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 13ca2c3..82527da 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -28,7 +28,6 @@
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-#define CONFIG_ENV_OVERWRITE
 
 /*
  * sysclk for MPC85xx
@@ -58,15 +57,11 @@
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
 
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
 #define CONFIG_SYS_CCSRBAR		0xe0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_SPD
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
@@ -115,8 +110,6 @@
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
-
 /*
  * Local Bus Definitions
  */
@@ -212,11 +205,6 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* RapidIO MMU */
@@ -239,8 +227,6 @@
 #define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR	0xe0000000
@@ -249,7 +235,6 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -282,14 +267,6 @@
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-  #define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #define CONFIG_ENV_SIZE		0x2000
-#else
-  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-  #define CONFIG_ENV_SIZE		0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
@@ -299,10 +276,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
@@ -343,8 +316,6 @@
 #define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK   255.255.255.0
 
-#define CONFIG_LOADADDR  200000	/* default location for tftp and bootm */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
@@ -353,7 +324,7 @@
    "fdtaddr=400000\0"							\
    "fdtfile=your.fdt.dtb\0"
 
-#define CONFIG_NFSBOOTCOMMAND	                                        \
+#define NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
       "nfsroot=$serverip:$rootpath "                                    \
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
@@ -362,7 +333,7 @@
    "tftp $fdtaddr $fdtfile;"						\
    "bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND \
+#define RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
@@ -370,6 +341,6 @@
    "tftp $fdtaddr $fdtfile;"						\
    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND  NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */