X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8536DS.h;h=ce3340584cbb1b1e613a17575ed283143dc49e07;hb=0ed06c7ee483f33e410033ae5cba1010c60522d4;hp=294be3b53bfb7dd68fb095d3062c57e8552ee530;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 294be3b..ce33405 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -11,13 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
 #include "../board/freescale/common/ics307_clk.h"
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT	1
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD		1
 #define CONFIG_SYS_TEXT_BASE	0xf8f40000
@@ -42,24 +37,16 @@
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif
 
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500		1	/* BOOKE e500 family */
-#define CONFIG_MPC8536		1
-#define CONFIG_MPC8536DS	1
-
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
-#define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* Enable PCI controller 1 */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -108,7 +95,6 @@
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
@@ -119,7 +105,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 
@@ -156,7 +141,6 @@
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-
 /*
  * Memory map -- xxx -this is wrong, needs updating
  *
@@ -381,16 +365,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
 /*
  * I2C
  */
@@ -421,7 +395,6 @@
 #define CONFIG_HARD_SPI
 
 #if defined(CONFIG_SPI_FLASH)
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED	10000000
 #define CONFIG_SF_DEFAULT_MODE	0
 #endif
@@ -510,9 +483,6 @@
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 
 #if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
 /*PCIE video card used*/
 #define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE3_IO_VIRT
 
@@ -520,13 +490,9 @@
 /*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
 
 /* video */
-#define CONFIG_VIDEO
 
 #if defined(CONFIG_VIDEO)
 #define CONFIG_BIOSEMU
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
@@ -534,7 +500,6 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#undef CONFIG_RTL8139
 
 #ifndef CONFIG_PCI_PNP
 	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
@@ -562,7 +527,6 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
@@ -630,9 +594,6 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
@@ -642,12 +603,9 @@
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #endif
 
@@ -659,16 +617,12 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
 #endif
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -727,7 +681,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE	115200
@@ -749,7 +702,7 @@
 "consoledev=ttyS0\0"				\
 "ramdiskaddr=2000000\0"			\
 "ramdiskfile=8536ds/ramdisk.uboot\0"		\
-"fdtaddr=c00000\0"				\
+"fdtaddr=1e00000\0"				\
 "fdtfile=8536ds/mpc8536ds.dtb\0"		\
 "bdev=sda3\0"					\
 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"