X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8536DS.h;h=9298c3080cb3dd06f5a6ca66164d0a23362f8617;hb=312a6c016a2d81aa3fbc605f5c0c315b6a4e3464;hp=27221648e42cfc73d5a73b0e872d04d7c4f213a3;hpb=b5b8d85e9a50c2294b6043830cd045de1002dc5d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 2722164..9298c30 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -11,7 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 #include "../board/freescale/common/ics307_clk.h"
 
@@ -50,7 +49,6 @@
 #define CONFIG_MPC8536DS	1
 
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
-#define CONFIG_SPI_FLASH	1	/* Has SPI Flash */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* Enable PCI controller 1 */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
@@ -62,7 +60,6 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-#define CONFIG_E1000		1	/* Defind e1000 pci Ethernet card*/
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -308,7 +305,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000, \
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE	4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
@@ -372,7 +368,6 @@
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -390,13 +385,6 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
  * I2C
  */
 #define CONFIG_SYS_I2C
@@ -424,10 +412,8 @@
  * eSPI - Enhanced SPI
  */
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
 #if defined(CONFIG_SPI_FLASH)
-#define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED	10000000
 #define CONFIG_SF_DEFAULT_MODE	0
@@ -536,7 +522,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 #endif
 
@@ -637,20 +622,15 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #endif
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
@@ -721,13 +701,9 @@
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR	00:E0:0C:02:00:FD
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
 #define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
 #endif
 
 #define CONFIG_IPADDR		192.168.1.254