X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8536DS.h;h=7697e8d3e0613b79a7458e3c8d19dded4c2aa138;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=9f0039c549505e8f5e775b2c46f60724ad34d894;hpb=0bb430c8494e26e8d258cf6957cdd39d2ce4f309;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 9f0039c..7697e8d 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -37,11 +36,9 @@
 #define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
@@ -85,7 +82,6 @@
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
-#undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 
@@ -183,18 +179,13 @@
 
 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
-#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
-
 #define CONFIG_HWCONFIG			/* enable hwconfig */
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
@@ -340,7 +331,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -379,16 +369,6 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
-#if defined(CONFIG_SPI_FLASH)
-#define CONFIG_SF_DEFAULT_SPEED	10000000
-#define CONFIG_SF_DEFAULT_MODE	0
-#endif
-
-/*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
@@ -515,7 +495,6 @@
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_TSEC1	1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
@@ -544,10 +523,6 @@
 
 #if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS	0
-#define CONFIG_ENV_SPI_CS	0
-#define CONFIG_ENV_SPI_MAX_HZ	10000000
-#define CONFIG_ENV_SPI_MODE	0
 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
 #define CONFIG_ENV_OFFSET	0xF0000
 #define CONFIG_ENV_SECT_SIZE	0x10000
@@ -571,7 +546,6 @@
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -617,7 +591,7 @@
 
 #define CONFIG_IPADDR		192.168.1.254
 
-#define CONFIG_HOSTNAME		unknown
+#define CONFIG_HOSTNAME		"unknown"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */