X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8536DS.h;h=17575c981d1a23e9a8081afefb1d08e1d9da7058;hb=07dea2e737f78ee70e81c27d976811f0e9fdbad8;hp=6b9c25f0c994ac49664bd2f811bcc4bf0c6a1a2f;hpb=f0ca30fa19ee57e2f8452a1d0b8a30eb923d7e22;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 6b9c25f..17575c9 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -15,20 +15,14 @@
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD		1
-#define CONFIG_SYS_TEXT_BASE	0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH		1
-#define CONFIG_SYS_TEXT_BASE	0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
 #endif
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xeff40000
-#endif
-
 #ifndef	CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
@@ -47,7 +41,6 @@
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
@@ -69,7 +62,6 @@
 
 #define CONFIG_SYS_MEMTEST_START 0x00010000	/* skip exception vectors */
 #define CONFIG_SYS_MEMTEST_END   0x1f000000	/* skip u-boot at top of RAM */
-#define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Config the L2 Cache as L2 SRAM
@@ -200,8 +192,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
-#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
-
 #define CONFIG_HWCONFIG			/* enable hwconfig */
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
@@ -347,7 +337,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -508,9 +497,6 @@
 #endif	/* CONFIG_PCI */
 
 /* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
@@ -578,19 +564,9 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -608,19 +584,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -660,8 +624,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 "netdev=eth0\0"						\
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\