X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC837XERDB.h;h=b5c05fecc65f88729fa7face054da3c20f5e3703;hb=553f09823cced77296825f615f00321d932bf914;hp=7ef92f7be1f47da7b004c2b199f3ee9b7e7ce088;hpb=7b5ae460c34fa43261fe1ded71dc9c33d3ffd8e5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 7ef92f7..b5c05fe 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -30,6 +30,8 @@
 #define CONFIG_MPC837x		1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XERDB	1
 
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+
 #define CONFIG_PCI	1
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -220,7 +222,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -236,9 +238,9 @@
  */
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
 #define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -246,6 +248,7 @@
 #define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 #define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_FSL_ELBC		1
 
 /*
  * FLASH on the Local Bus
@@ -315,7 +318,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -343,9 +345,6 @@
 #define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
-#define CONFIG_SYS_64BIT_STRTOUL		1
-#define CONFIG_SYS_64BIT_VSPRINTF		1
-
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
@@ -511,6 +510,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
@@ -546,16 +546,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT		0x000000000
-#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
+				 HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2		HID2_HBE
 
 /*
@@ -628,14 +629,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
@@ -646,20 +639,8 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifdef CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR		00:04:9f:ef:04:01
-#endif
-
-#ifdef CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:04:9f:ef:04:02
-#endif
-
 #define CONFIG_HAS_FSL_DR_USB
 
-#define CONFIG_IPADDR		10.0.0.2
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_GATEWAYIP	10.0.0.1
-#define CONFIG_NETMASK		255.0.0.0
 #define CONFIG_NETDEV		eth1
 
 #define CONFIG_HOSTNAME		mpc837x_rdb
@@ -680,11 +661,11 @@
 	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
 	"tftpflash=tftp $loadaddr $uboot;"				\
-		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
 	"fdtaddr=780000\0"						\
 	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
 	"ramdiskaddr=1000000\0"						\