X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC837XEMDS.h;h=f6afa9dcc961131ba8681a3daabb1f69da7d9fa0;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=dd2aa04fa9fe1fee6974588c5b3a5f3216a120c8;hpb=645176d1d5c37c91ddb06c366678fbe302550387;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index dd2aa04..f6afa9d 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -8,8 +8,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -99,7 +97,6 @@
  */
 #define CONFIG_SYS_OBIR		0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
@@ -281,7 +278,6 @@
 /*
  * NAND Flash on the Local Bus
  */
-#define CONFIG_CMD_NAND		1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_NAND_FSL_ELBC	1
 
@@ -379,12 +375,9 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
@@ -442,22 +435,17 @@ extern int board_pci_host_broken(void);
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-	#define CONFIG_ENV_IS_IN_FLASH	1
 	#define CONFIG_ENV_ADDR		\
 			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 	#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
 	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
-	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
 #endif
@@ -476,7 +464,6 @@ extern int board_pci_host_broken(void);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -487,14 +474,10 @@ extern int board_pci_host_broken(void);
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -655,8 +638,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR 800000	/* default location for tftp and bootm */
 
 #undef CONFIG_BOOTARGS		/* the boot command will set bootargs */