X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC837XEMDS.h;h=03aedeca53eea1e06b5de1b061c1965ad2214220;hb=10d1a160f5e28b05f891c050ca2f23855b226f5f;hp=8546ebc31f3f5ea286186940f44fae90fc21eb1a;hpb=2e6e1772c0e34871769be4aef79748fe3e47d953;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 8546ebc..03aedec 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -29,6 +29,8 @@
 #define CONFIG_MPC837x		1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XEMDS	1 /* MPC837XEMDS board specific */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+
 /*
  * System Clock Setup
  */
@@ -196,7 +198,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -213,9 +215,8 @@
  */
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -384,7 +385,6 @@ extern int board_pci_host_broken(void);
 
 #define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -392,10 +392,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI	1
-#endif
-
 /*
  * TSEC
  */
@@ -508,6 +504,7 @@ extern int board_pci_host_broken(void);
 
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
@@ -618,14 +615,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */