X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8360EMDS.h;h=bc644bab05f90e0670b1c311ac9aac7a6abc56cf;hb=d98b0523cfaaedeecb263b15c121c0727b0d80b9;hp=b9b5eaba2e728a192565707a4ff621895af610a8;hpb=fafe2a9e23cb03d4a55027a172aadffa08977d18;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index b9b5eab..bc644ba 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -30,6 +30,9 @@
 #define CONFIG_MPC83xx		1 /* MPC83xx family */
 #define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+
 #undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
 #undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
 
@@ -161,7 +164,7 @@
  * The reserved memory
  */
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -307,7 +310,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -320,6 +322,7 @@
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef	CONFIG_SYS_HUSH_PARSER
@@ -389,7 +392,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 #define CONFIG_PHY_MODE_NEED_CHANGE
 
 #define CONFIG_UEC_ETH1		/* GETH1 */
@@ -486,16 +489,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT		0x000000000
-#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
+				 HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2		HID2_HBE
 
 /*
@@ -566,14 +570,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */