X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=fcc1a73f814f23b1c48d80d9aa54487ec50fd9f1;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=1130b59a217ac2f967bbe84a7d6850add5d21101;hpb=fbbbc86e8ebac4f42f4ca39ceba80cea27c983bc;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 1130b59..fcc1a73 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -1,23 +1,7 @@ /* * Copyright (C) Freescale Semiconductor, Inc. 2006. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -63,7 +47,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ @@ -88,9 +71,8 @@ #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif -#define CONFIG_PCI #define CONFIG_RTC_DS1337 -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ /* @@ -98,12 +80,15 @@ */ /* I2C */ -#ifdef CONFIG_HARD_I2C +#ifdef CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_FSL_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_OFFSET 0x3000 -#define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ @@ -115,9 +100,6 @@ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - /* Don't probe these addresses: */ #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ {1, CONFIG_SYS_I2C_8574_ADDR2}, \ @@ -131,8 +113,6 @@ #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ -#undef CONFIG_SOFT_I2C - #endif /* Compact Flash */ @@ -168,8 +148,6 @@ /* * Support USB */ -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL @@ -199,7 +177,7 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) -#ifdef CONFIG_HARD_I2C +#ifdef CONFIG_SYS_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif @@ -348,7 +326,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* @@ -370,7 +348,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -378,17 +355,12 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CONFIG_CONSOLE ttyS0 +#define CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - /* * PCI */ @@ -427,8 +399,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE @@ -508,24 +478,15 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#include - -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_IRQ -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ || defined(CONFIG_USB_STORAGE) - #define CONFIG_DOS_PARTITION - #define CONFIG_CMD_FAT #define CONFIG_SUPPORT_VFAT #endif @@ -538,17 +499,12 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) - #define CONFIG_CMD_EXT2 #endif #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -#ifdef CONFIG_HARD_I2C - #define CONFIG_CMD_I2C -#endif - /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -558,17 +514,10 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#ifdef CONFIG_MPC8349ITX -#define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ -#endif - #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -580,7 +529,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data @@ -589,6 +537,7 @@ boards, we say we have two, but don't display a message if we find only one. */ */ /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #define CONFIG_SYS_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ @@ -749,10 +698,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - /* * Environment Configuration */ @@ -778,7 +725,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" #endif -#define CONFIG_BOOTDELAY 6 #define CONFIG_BOOTARGS \ "root=/dev/nfs rw" \ @@ -788,10 +734,10 @@ boards, we say we have two, but don't display a message if we find only one. */ __stringify(CONFIG_GATEWAYIP) ":" \ __stringify(CONFIG_NETMASK) ":" \ CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ - " console=" __stringify(CONFIG_CONSOLE) "," __stringify(CONFIG_BAUDRATE) + " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) #define CONFIG_EXTRA_ENV_SETTINGS \ - "console=" __stringify(CONFIG_CONSOLE) "\0" \ + "console=" __stringify(CONSOLE) "\0" \ "netdev=" CONFIG_NETDEV "\0" \ "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \