X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=e7031e94fd9e4be9d28a2b10d8f63174b09f593d;hb=93de25308dac01dd1a6ff5891e13ea849041a88a;hp=9e061bc626e33b196c2379c289e9acac69d6c286;hpb=6637cb7691e55fcf139ba9ff528f60909b9b838c;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 9e061bc..e7031e9 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -1,7 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) Freescale Semiconductor, Inc. 2006. - * - * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -40,41 +39,26 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) -#define CONFIG_SYS_LOWBOOT -#endif - /* * High Level Configuration Options */ -#define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ -#define CONFIG_MPC8349 /* MPC8349 specific */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFEF00000 -#endif - #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ #define CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R /* * On-board devices */ -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX /* The CF card interface on the back of the board */ #define CONFIG_COMPACT_FLASH #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ -#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif -#define CONFIG_PCI #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C -#define CONFIG_TSEC_ENET /* TSEC Ethernet support */ /* * Device configurations @@ -140,7 +124,6 @@ #ifdef CONFIG_SATA_SIL3114 #define CONFIG_SYS_SATA_MAX_DEVICE 4 -#define CONFIG_LIBATA #define CONFIG_LBA48 #endif @@ -149,7 +132,6 @@ /* * Support USB */ -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL /* Current USB implementation supports the only USB controller, @@ -197,8 +179,6 @@ *Flash on the Local Bus */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 127 64KB sectors + 8 8KB sectors per device */ @@ -214,7 +194,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_FLASH_BANKS_LIST \ {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ /* Vitesse 7385 */ @@ -348,7 +327,6 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Serial Port */ -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -357,7 +335,6 @@ boards, we say we have two, but don't display a message if we find only one. */ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONSOLE ttyS0 -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) @@ -400,8 +377,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE @@ -412,20 +387,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define CONFIG_PCI_66M -#ifdef CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#endif - /* TSEC */ #ifdef CONFIG_TSEC_ENET - -#define CONFIG_MII -#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ - #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 @@ -457,15 +421,11 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_ENV_OVERWRITE #ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ #define CONFIG_ENV_SIZE 0x2000 #else - #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ - #undef CONFIG_FLASH_CFI_DRIVER - #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif @@ -477,37 +437,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SDRAM - -#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ - || defined(CONFIG_USB_STORAGE) - #define CONFIG_DOS_PARTITION - #define CONFIG_SUPPORT_VFAT -#endif - -#ifdef CONFIG_COMPACT_FLASH - #define CONFIG_CMD_IDE -#endif - -#ifdef CONFIG_SATA_SIL3114 - #define CONFIG_CMD_SATA -#endif - -#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) -#endif - -#ifdef CONFIG_PCI - #define CONFIG_CMD_PCI -#endif /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -515,25 +444,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is @@ -543,41 +457,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) - -#ifdef CONFIG_SYS_LOWBOOT -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* * System performance */ @@ -602,7 +481,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE #define CONFIG_SYS_HID2 HID2_HBE -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR */ #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ @@ -711,35 +589,19 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NETDEV "eth0" -#ifdef CONFIG_MPC8349ITX -#define CONFIG_HOSTNAME "mpc8349emitx" -#else -#define CONFIG_HOSTNAME "mpc8349emitxgp" -#endif - /* Default path and filenames */ #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" /* U-Boot image on TFTP server */ #define CONFIG_UBOOTPATH "u-boot.bin" -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX #define CONFIG_FDTFILE "mpc8349emitx.dtb" #else #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" #endif -#define CONFIG_BOOTARGS \ - "root=/dev/nfs rw" \ - " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ - " ip=" __stringify(CONFIG_IPADDR) ":" \ - __stringify(CONFIG_SERVERIP) ":" \ - __stringify(CONFIG_GATEWAYIP) ":" \ - __stringify(CONFIG_NETMASK) ":" \ - CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ - " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) - #define CONFIG_EXTRA_ENV_SETTINGS \ "console=" __stringify(CONSOLE) "\0" \ "netdev=" CONFIG_NETDEV "\0" \