X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=d49c1ff76b95691747db8b200629b7493b19b5da;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=09f9e38470f639743f615fa7bb6ec382dca712d9;hpb=a059e90e16e126e25da33ce23a37e2acce84284c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 09f9e38..d49c1ff 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -56,16 +56,21 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if (TEXT_BASE == 0xFE000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
 #define CONFIG_SYS_LOWBOOT
 #endif
 
 /*
  * High Level Configuration Options
  */
+#define CONFIG_MPC83xx		1
 #define CONFIG_MPC834x		/* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349		/* MPC8349 specific */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFEF00000
+#endif
+
 #define CONFIG_SYS_IMMR		0xE0000000	/* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
@@ -291,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * U-Boot memory configuration
  */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -328,7 +333,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -394,8 +398,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #endif
 
-#define PCI_66M
-#ifdef PCI_66M
+#define CONFIG_PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_83XX_CLKIN	66666666	/* in Hz */
 #else
 #define CONFIG_83XX_CLKIN	33333333	/* in Hz */
@@ -538,10 +542,10 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -596,8 +600,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)	/* USB DR as device + USB MPH as host */
 
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_INIT	0x00000000
+#define CONFIG_SYS_HID0_FINAL	HID0_ENABLE_INSTRUCTION_CACHE
 
 #define CONFIG_SYS_HID2	HID2_HBE
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
@@ -716,11 +720,11 @@ boards, we say we have two, but don't display a message if we find only one. */
 	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
 	"tftpflash=tftpboot $loadaddr $uboot; "				\
-		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
 	"fdtaddr=780000\0"						\
 	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"