X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=c395d62379036ac20117002d7b6687a01d744c55;hb=8754656680b673b64282bc8d03c0e3f3ad0978c4;hp=46f09d6b60f9ac1b68510d756435ef6d2b61bc18;hpb=711391131c84398d1b8256ab5a8cfa2969ad57c7;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 46f09d6..c395d62 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -1,7 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) Freescale Semiconductor, Inc. 2006. - * - * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -40,40 +39,21 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) -#define CONFIG_SYS_LOWBOOT -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ -#define CONFIG_MPC8349 /* MPC8349 specific */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFEF00000 -#endif - -#define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ - #define CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R /* * On-board devices */ -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX /* The CF card interface on the back of the board */ #define CONFIG_COMPACT_FLASH #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ -#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C -#define CONFIG_TSEC_ENET /* TSEC Ethernet support */ /* * Device configurations @@ -139,7 +119,6 @@ #ifdef CONFIG_SATA_SIL3114 #define CONFIG_SYS_SATA_MAX_DEVICE 4 -#define CONFIG_LIBATA #define CONFIG_LBA48 #endif @@ -163,9 +142,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_83XX_DDR_USES_CS0 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x2000 @@ -195,8 +172,6 @@ *Flash on the Local Bus */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 127 64KB sectors + 8 8KB sectors per device */ @@ -212,7 +187,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_FLASH_BANKS_LIST \ {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ /* Vitesse 7385 */ @@ -230,63 +204,13 @@ boards, we say we have two, but don't display a message if we find only one. */ * BRx, ORx, LBLAWBARx, and LBLAWARx */ -/* Flash */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) /* Vitesse 7385 */ #define CONFIG_SYS_VSC7385_BASE 0xF8000000 -#ifdef CONFIG_VSC7385_ENET - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) - -#endif - -/* LED */ - #define CONFIG_SYS_LED_BASE 0xF9000000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) + /* Compact Flash */ @@ -294,14 +218,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_CF_BASE 0xF0000000 -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ - | BR_PS_16 \ - | BR_MS_UPMA \ - | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) #endif @@ -329,24 +245,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32*/ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* * Serial Port */ -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -407,20 +307,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define CONFIG_PCI_66M -#ifdef CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#endif - /* TSEC */ #ifdef CONFIG_TSEC_ENET - -#define CONFIG_MII -#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ - #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 @@ -452,14 +341,11 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_ENV_OVERWRITE #ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ #define CONFIG_ENV_SIZE 0x2000 #else - #undef CONFIG_FLASH_CFI_DRIVER - #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif @@ -471,30 +357,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - -#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ - || defined(CONFIG_USB_STORAGE) - #define CONFIG_SUPPORT_VFAT -#endif - -#ifdef CONFIG_SATA_SIL3114 - #define CONFIG_CMD_SATA -#endif - -#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) -#endif - -#ifdef CONFIG_PCI - #define CONFIG_CMD_PCI -#endif /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -502,25 +364,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is @@ -530,48 +377,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) - -#ifdef CONFIG_SYS_LOWBOOT -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* * System performance */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ -#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ @@ -585,108 +393,6 @@ boards, we say we have two, but don't display a message if we find only one. */ /* USB DR as device + USB MPH as host */ #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) -#define CONFIG_SYS_HID0_INIT 0x00000000 -#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE - -#define CONFIG_SYS_HID2 HID2_HBE -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI */ -#ifdef CONFIG_PCI -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L 0 -#define CONFIG_SYS_IBAT1U 0 -#define CONFIG_SYS_IBAT2L 0 -#define CONFIG_SYS_IBAT2U 0 -#endif - -#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L 0 -#define CONFIG_SYS_IBAT3U 0 -#define CONFIG_SYS_IBAT4L 0 -#define CONFIG_SYS_IBAT4U 0 -#endif - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L 0 -#define CONFIG_SYS_IBAT7U 0 - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif @@ -698,35 +404,19 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NETDEV "eth0" -#ifdef CONFIG_MPC8349ITX -#define CONFIG_HOSTNAME "mpc8349emitx" -#else -#define CONFIG_HOSTNAME "mpc8349emitxgp" -#endif - /* Default path and filenames */ #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" /* U-Boot image on TFTP server */ #define CONFIG_UBOOTPATH "u-boot.bin" -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX #define CONFIG_FDTFILE "mpc8349emitx.dtb" #else #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" #endif -#define CONFIG_BOOTARGS \ - "root=/dev/nfs rw" \ - " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ - " ip=" __stringify(CONFIG_IPADDR) ":" \ - __stringify(CONFIG_SERVERIP) ":" \ - __stringify(CONFIG_GATEWAYIP) ":" \ - __stringify(CONFIG_NETMASK) ":" \ - CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ - " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) - #define CONFIG_EXTRA_ENV_SETTINGS \ "console=" __stringify(CONSOLE) "\0" \ "netdev=" CONFIG_NETDEV "\0" \