X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=4999004d4a313fcaf67fa3a3d752c3c9fe45a41b;hb=62a22dca32b988cce5d1908e8ac9fadb139bb3e8;hp=fd5ad70201d2b9ccd0a0568b3732292f4dd1c7fa;hpb=4c2e3da82dc2b7f8b39b7f1d57f570e4bc5caa6d;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index fd5ad70..4999004 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -56,16 +56,21 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if (TEXT_BASE == 0xFE000000) +#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) #define CONFIG_SYS_LOWBOOT #endif /* * High Level Configuration Options */ +#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFEF00000 +#endif + #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ #define CONFIG_MISC_INIT_F @@ -291,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * U-Boot memory configuration */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT @@ -301,10 +306,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ @@ -317,7 +321,8 @@ boards, we say we have two, but don't display a message if we find only one. */ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ @@ -327,7 +332,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -380,7 +384,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #ifndef CONFIG_PCI_PNP @@ -393,8 +396,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ @@ -404,7 +407,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifdef CONFIG_TSEC_ENET -#define CONFIG_NET_MULTI #define CONFIG_MII #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ @@ -510,12 +512,13 @@ boards, we say we have two, but don't display a message if we find only one. */ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #ifdef CONFIG_MPC8349ITX #define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ @@ -536,10 +539,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is + * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ #define CONFIG_SYS_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ @@ -594,8 +597,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT +#define CONFIG_SYS_HID0_INIT 0x00000000 +#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE #define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ @@ -658,14 +661,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ @@ -677,18 +672,6 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 -#endif - -#ifdef CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 -#endif - -#define CONFIG_IPADDR 192.168.1.253 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.252.0 #define CONFIG_NETDEV eth0 #ifdef CONFIG_MPC8349ITX @@ -708,7 +691,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_FDTFILE mpc8349emitxgp.dtb #endif -#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTDELAY 6 #define XMK_STR(x) #x #define MK_STR(x) XMK_STR(x) @@ -726,12 +709,12 @@ boards, we say we have two, but don't display a message if we find only one. */ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ - "erase " MK_STR(TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ - "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ - "fdtaddr=400000\0" \ + "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ + "fdtaddr=780000\0" \ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" #define CONFIG_NFSBOOTCOMMAND \