X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349ITX.h;h=068df57e0aad8d07f51e4005ce2e6a4be35bca61;hb=10faafd5ff103ee493b6a05724eb605d09836d4a;hp=38a7386d09eaf490e4692c0bb46185a0959556aa;hpb=b7be63abec45858c044f0fbd6aeef524c4663f9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 38a7386..068df57 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -63,7 +63,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC834x		/* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349		/* MPC8349 specific */
 
 #define CONFIG_SYS_IMMR		0xE0000000	/* The IMMR is relocated to here */
@@ -79,6 +79,7 @@
 #define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
 #define CONFIG_VSC7385_ENET	/* VSC7385 ethernet support */
 #define CONFIG_SATA_SIL3114	/* SIL3114 SATA controller */
+#define CONFIG_SYS_USB_HOST	/* use the EHCI USB controller */
 #endif
 
 #define CONFIG_PCI
@@ -95,7 +96,6 @@
 
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1	/* The I2C bus for SPD */
@@ -156,6 +156,25 @@
 
 #endif
 
+#ifdef CONFIG_SYS_USB_HOST
+/*
+ * Support USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+
+/* Current USB implementation supports the only USB controller,
+ * so we have to choose between the MPH or the DR ones */
+#if 1
+#define CONFIG_HAS_FSL_MPH_USB
+#else
+#define CONFIG_HAS_FSL_DR_USB
+#endif
+
+#endif
+
 /*
  * DDR Setup
  */
@@ -289,7 +308,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
@@ -361,16 +380,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */
 #endif
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space */
-
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)	    (x)
-#endif
-
 #ifndef CONFIG_PCI_PNP
     #define PCI_ENET0_IOADDR	0x00000000
     #define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI2_MEM_BASE
@@ -464,9 +476,11 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SDRAM
 
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
+#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
+    || defined(CONFIG_USB_STORAGE)
     #define CONFIG_DOS_PARTITION
     #define CONFIG_CMD_FAT
+    #define CONFIG_SUPPORT_VFAT
 #endif
 
 #ifdef CONFIG_COMPACT_FLASH
@@ -475,6 +489,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifdef CONFIG_SATA_SIL3114
     #define CONFIG_CMD_SATA
+#endif
+
+#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
     #define CONFIG_CMD_EXT2
 #endif
 
@@ -568,12 +585,14 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
 #define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
 #define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_USBMPHCM 3	/* USB MPH controller's clock */
+#define CONFIG_SYS_SCCR_USBDRCM	0	/* USB DR controller's clock */
 
 /*
  * System IO Config
  */
 #define CONFIG_SYS_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
-#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
+#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)	/* USB DR as device + USB MPH as host */
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
 #define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
@@ -615,7 +634,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \
+				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 #define CONFIG_SYS_IBAT7L	0