X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349EMDS.h;h=bda477cc16044468f247d6707d1e6c5ed0a98592;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=7b6e8c2daf57ddae9386bfbd5690b999df75802e;hpb=5ebd27d860ec0c6e36f1b0f973653fe66a7360be;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 7b6e8c2..bda477c 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2006-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -19,9 +18,6 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 #define CONFIG_PCI_66M #ifdef CONFIG_PCI_66M @@ -31,7 +27,6 @@ #endif #ifdef CONFIG_PCISLAVE -#define CONFIG_PCI #define CONFIG_83XX_PCICLK 66666666 /* in Hz */ #endif /* CONFIG_PCISLAVE */ @@ -45,8 +40,6 @@ #endif #endif -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ - #define CONFIG_SYS_IMMR 0xE0000000 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ @@ -61,21 +54,16 @@ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* - * define CONFIG_SYS_FSL_DDR2 to use unified DDR driver - * undefine it to use old spd_sdram.c + * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver + * unselect it to use old spd_sdram.c */ -#define CONFIG_SYS_FSL_DDR2 -#ifdef CONFIG_SYS_FSL_DDR2 -#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x52 #define SPD_EEPROM_ADDRESS2 0x51 -#define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#endif /* * 32-bit data path mode. @@ -155,12 +143,8 @@ /* * FLASH on the Local Bus */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ | BR_PS_16 /* 16 bit port */ \ @@ -315,7 +299,6 @@ /* * Serial Port */ -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -326,9 +309,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL @@ -341,7 +321,6 @@ #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* SPI */ -#define CONFIG_MPC8XXX_SPI #undef CONFIG_SOFT_SPI /* SPI bit-banged */ /* GPIOs. Used as SPI chip selects */ @@ -391,7 +370,6 @@ #undef PCI_ONE_PCI1 #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 @@ -411,7 +389,6 @@ /* * TSEC configuration */ -#define CONFIG_TSEC_ENET /* TSEC ethernet support */ #if defined(CONFIG_TSEC_ENET) @@ -442,7 +419,6 @@ * Environment */ #ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ @@ -453,8 +429,6 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif @@ -466,39 +440,18 @@ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMD_DATE - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is @@ -727,16 +680,12 @@ #define CONFIG_HAS_ETH0 #endif -#define CONFIG_HOSTNAME mpc8349emds +#define CONFIG_HOSTNAME "mpc8349emds" #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo"