X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349EMDS.h;h=a53f5cd2612b6fab2cd5bd50a173f353caa6755c;hb=d3c23a790fb24f9cb5cc467b81b0c3ad3eeb1f96;hp=7d5b17b50b1792d3899173731094afb0910eb2e5;hpb=b2893e1fcb28fad8c8b317104df8cee0142c7631;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 7d5b17b..a53f5cd 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -29,8 +29,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -41,7 +39,7 @@
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
 
 #undef CONFIG_PCI
-#undef CONFIG_MPC83XX_PCI2 		/* support for 2nd PCI controller */
+#undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
 
 #define PCI_66M
 #ifdef PCI_66M
@@ -150,7 +148,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI				/* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		32		/* max flash size in MB */
 /* #define CFG_FLASH_USE_BUFFER_WRITE */
@@ -159,7 +157,7 @@
 				(2 << BR_PS_SHIFT) |	/* 16 bit port size */	 \
 				BR_V)			/* valid */
 #define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
-				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32 MB window size */
@@ -341,11 +339,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -359,6 +353,15 @@
 #define CFG_I2C_OFFSET		0x3000
 #define CFG_I2C2_OFFSET		0x3100
 
+/* SPI */
+#define CONFIG_MPC8XXX_SPI
+#undef CONFIG_SOFT_SPI			/* SPI bit-banged */
+
+/* GPIOs.  Used as SPI chip selects */
+#define CFG_GPIO1_PRELIM
+#define CFG_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
+#define CFG_GPIO1_DAT		0xC0000000  /* Both are active LOW */
+
 /* TSEC */
 #define CFG_TSEC1_OFFSET 0x24000
 #define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
@@ -410,7 +413,7 @@
 #if !defined(CONFIG_PCI_PNP)
 	#define PCI_ENET0_IOADDR	0xFIXME
 	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+	#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
@@ -531,13 +534,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
@@ -605,6 +601,16 @@
 	HRCWH_TSEC2M_IN_GMII )
 #endif
 
+/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+
 /* System IO Config */
 #define CFG_SICRH SICRH_TSOBI1
 #define CFG_SICRL SICRL_LDP_A
@@ -619,6 +625,7 @@
 
 
 #define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR @ 0x00000000 */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -712,7 +719,7 @@
 #define CONFIG_GATEWAYIP	192.168.1.1
 #define CONFIG_NETMASK		255.255.255.0
 
-#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
@@ -720,7 +727,7 @@
 #define CONFIG_BAUDRATE	 115200
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -742,7 +749,7 @@
 	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
 	"update=protect off fe000000 fe03ffff; "			\
 		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
-	"upd=run load;run update\0"					\
+	"upd=run load update\0"						\
 	"fdtaddr=400000\0"						\
 	"fdtfile=mpc8349emds.dtb\0"					\
 	""