X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349EMDS.h;h=9b906a7c774ec66325094bb304f5fb821dd8ae85;hb=e090579d0a2d1aa38eab94b98877de9bcdd4f31d;hp=7640d06ee77aa76f9815585db66ffef6cb27e3ef;hpb=215ab45a67672a7c1ceb347f7b74c94323415222;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 7640d06..9b906a7 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ @@ -32,7 +31,6 @@ #endif #ifdef CONFIG_PCISLAVE -#define CONFIG_PCI #define CONFIG_83XX_PCICLK 66666666 /* in Hz */ #endif /* CONFIG_PCISLAVE */ @@ -46,8 +44,6 @@ #endif #endif -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ - #define CONFIG_SYS_IMMR 0xE0000000 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ @@ -62,21 +58,16 @@ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* - * define CONFIG_SYS_FSL_DDR2 to use unified DDR driver - * undefine it to use old spd_sdram.c + * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver + * unselect it to use old spd_sdram.c */ -#define CONFIG_SYS_FSL_DDR2 -#ifdef CONFIG_SYS_FSL_DDR2 -#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x52 #define SPD_EEPROM_ADDRESS2 0x51 -#define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#endif /* * 32-bit data path mode. @@ -224,7 +215,7 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* @@ -317,7 +308,6 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -330,13 +320,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_SYS_I2C @@ -400,7 +383,6 @@ #undef PCI_ONE_PCI1 #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 @@ -451,7 +433,6 @@ * Environment */ #ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ @@ -462,8 +443,6 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif @@ -471,7 +450,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - /* * BOOTP options */ @@ -480,26 +458,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#include - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_MII - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -509,18 +470,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is @@ -528,6 +477,7 @@ */ /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ @@ -634,7 +584,6 @@ HID0_ENABLE_M_BIT |\ HID0_ENABLE_ADDRESS_BROADCAST) */ - #define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ @@ -755,11 +704,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo"