X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8349EMDS.h;h=6286d5ec285a21665e262213e5bef482805841b9;hb=72d81360aabd0485d3832d292bbea29c7c4554ef;hp=e4d90589e9ad2793cff749032dd79a45b1dfe4d2;hpb=30915ab95d9a95328623010390d94da1325529f9;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index e4d9058..6286d5e 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -17,17 +17,11 @@ */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_SYS_IMMR 0xE0000000 - #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 /* * DDR Setup */ -#define CONFIG_DDR_ECC /* support DDR ECC function */ -#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* @@ -39,28 +33,11 @@ #define SPD_EEPROM_ADDRESS2 0x51 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -/* - * 32-bit data path mode. - * - * Please note that using this mode for devices with the real density of 64-bit - * effectively reduces the amount of available memory due to the effect of - * wrapping around while translating address to row/columns, for example in the - * 256MB module the upper 128MB get aliased with contents of the lower - * 128MB); normally this define should be used for devices with real 32-bit - * data path. - */ -#undef CONFIG_DDR_32BIT - -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#undef CONFIG_DDR_2T_TIMING - /* * DDRCDR - DDR Control Driver Register */ @@ -76,21 +53,6 @@ * Manually set up DDR parameters */ #define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#if defined(CONFIG_DDR_II) -#define CONFIG_SYS_DDRCDR 0x80080001 -#define CONFIG_SYS_DDR_CS2_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS2_CONFIG 0x80330102 -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x38357322 -#define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000 -#define CONFIG_SYS_DDR_MODE 0x47d00432 -#define CONFIG_SYS_DDR_MODE2 0x8000c000 -#define CONFIG_SYS_DDR_INTERVAL 0x03cf0080 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#else #define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \ | CSCONFIG_ROW_BIT_13 \ | CSCONFIG_COL_BIT_10) @@ -99,17 +61,10 @@ #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ #define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ -#if defined(CONFIG_DDR_32BIT) -/* set burst length to 8 for 32-bit data path */ - /* DLL,normal,seq,4/2.5, 8 burst len */ -#define CONFIG_SYS_DDR_MODE 0x00000023 -#else /* the default burst length is 4 - for 64-bit data path */ /* DLL,normal,seq,4/2.5, 4 burst len */ #define CONFIG_SYS_DDR_MODE 0x00000022 #endif -#endif -#endif /* * SDRAM on the Local Bus @@ -123,23 +78,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -161,20 +99,7 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0x00000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) - /* 0xFFFFE8F0 */ + #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ @@ -188,16 +113,6 @@ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* * Serial Port */ #define CONFIG_SYS_NS16550_SERIAL @@ -211,14 +126,6 @@ #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) /* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* SPI */ @@ -264,11 +171,6 @@ #if defined(CONFIG_PCI) -#define CONFIG_83XX_PCI_STREAMING - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xFIXME #define PCI_ENET0_MEMADDR 0xFIXME @@ -276,7 +178,6 @@ #endif #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ #endif /* CONFIG_PCI */ @@ -313,18 +214,7 @@ * Environment */ #ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 - /* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#else - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 #endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -335,10 +225,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -360,10 +246,6 @@ /* * System performance */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ -#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ @@ -371,17 +253,6 @@ #define CONFIG_SYS_SICRH 0 #define CONFIG_SYS_SICRL SICRL_LDP_A -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE) - -/* #define CONFIG_SYS_HID0_FINAL (\ - HID0_ENABLE_INSTRUCTION_CACHE |\ - HID0_ENABLE_M_BIT |\ - HID0_ENABLE_ADDRESS_BROADCAST) */ - -#define CONFIG_SYS_HID2 HID2_HBE - #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE #endif @@ -393,7 +264,6 @@ /* * Environment Configuration */ -#define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH1 @@ -404,12 +274,6 @@ #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=mpc8349emds\0" \ @@ -434,7 +298,7 @@ "fdtfile=mpc834x_mds.dtb\0" \ "" -#define CONFIG_NFSBOOTCOMMAND \ +#define NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ @@ -444,7 +308,7 @@ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \