X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC832XEMDS.h;h=ae79369c6b0d925e1f9bcf9f37b7d0ac237d8d66;hb=2493ce6258a59881b702cbe255db9e53f1e3fd13;hp=a138bd6724f1d3f5fcc8fb90e58fb145e04bbd90;hpb=be5abb0a834c346f9b22f983e9002ebab2c72cb3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index a138bd6..ae79369 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -10,7 +10,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 family */
-#define CONFIG_QE		1	/* Has QE */
 
 /*
  * System IO Config
@@ -18,16 +17,9 @@
 #define CONFIG_SYS_SICRL		0x00000000
 
 /*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR		0xE0000000
-
-/*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE	0x00000000	/* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE	0x00000000	/* DDR is system memory */
 #define CONFIG_SYS_DDRCDR	0x73000002	/* DDR II voltage is 1.8V */
 
 #undef CONFIG_SPD_EEPROM
@@ -93,8 +85,6 @@
  * Memory test
  */
 #undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * The reserved memory
@@ -121,13 +111,6 @@
 			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP		LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_2
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-
-/*
  * FLASH on the Local Bus
  */
 #define CONFIG_SYS_FLASH_BASE	0xFE000000	/* FLASH base address */
@@ -213,7 +196,6 @@
 
 #define CONFIG_83XX_PCI_STREAMING
 
-#undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
 
@@ -252,15 +234,6 @@
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-	#define CONFIG_ENV_ADDR		\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-	#define CONFIG_ENV_SECT_SIZE	0x20000
-	#define CONFIG_ENV_SIZE		0x2000
-#else
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
@@ -270,10 +243,6 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Command line configuration.
- */
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*