X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC832XEMDS.h;h=716fc3822e80c8b5f9d43f5c253c9650d44e88c5;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=1735b3c5216e1f8002a04f90767673d0bfb1f04a;hpb=f763be224fa78893384416734419d8e052c1c5ef;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 1735b3c..716fc38 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -72,7 +72,6 @@
  */
 #define CONFIG_SYS_SICRL		0x00000000
 
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /*
@@ -166,7 +165,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)	/* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)	/* Reserved for malloc */
 
 /*
@@ -290,7 +289,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -303,13 +301,6 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -343,11 +334,9 @@
 #define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
 #define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
-
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
 
 #undef CONFIG_EEPRO100
@@ -396,7 +385,6 @@
 	#define CONFIG_ENV_SECT_SIZE	0x20000
 	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
@@ -413,26 +401,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_ASKENV
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*
@@ -460,6 +436,7 @@
  */
 					/* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -584,11 +561,8 @@
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE	115200
-
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
@@ -618,7 +592,6 @@
 	"tftp $fdtaddr $fdtfile;"					\
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */