X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC832XEMDS.h;h=01cf557bab5955488cbc0cee870c41a3cf704a35;hb=0e8d158664a913392cb01fb11a948d83f72e105e;hp=f62ca2c42bea298e74ffd4821dec3abefd97ad2e;hpb=3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f62ca2c4..01cf557 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -20,8 +20,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */
@@ -30,6 +28,8 @@
 #define CONFIG_MPC83XX		1	/* MPC83xx family */
 #define CONFIG_MPC832X		1	/* MPC832x CPU specific */
 #define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM	/* QOC3 ATM card */
 
 /*
  * System Clock Setup
@@ -87,6 +87,7 @@
 #define CFG_SICRL		0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * IMMR new address
@@ -142,6 +143,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -164,7 +166,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI		/* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
 #define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
 
@@ -315,17 +317,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE	8192
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -352,7 +346,7 @@
 #define CFG_PCI_MMIO_BASE	0x90000000
 #define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_BASE		0x00000000
 #define CFG_PCI_IO_PHYS		0xE0300000
 #define CFG_PCI_IO_SIZE		0x100000	/* 1M */
 
@@ -381,7 +375,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"Freescale GETH"
+#define CONFIG_ETHPRIME		"FSL UEC0"
 
 #define CONFIG_UEC_ETH1		/* ETH3 */
 
@@ -409,15 +403,15 @@
  * Environment
  */
 #ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000
+	#define CONFIG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
@@ -486,18 +480,11 @@
 #define CFG_HID2		HID2_HBE
 
 /*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
-#endif
-
-/*
  * MMU Setup
  */
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
 /* DDR: cache cacheable */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -579,6 +566,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR	00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
@@ -586,9 +574,9 @@
 
 #define CONFIG_BAUDRATE	115200
 
-#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR	500000	/* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
@@ -597,7 +585,7 @@
    "ramdiskaddr=1000000\0"						\
    "ramdiskfile=ramfs.83xx\0"						\
    "fdtaddr=400000\0"							\
-   "fdtfile=mpc832xemds.dtb\0"						\
+   "fdtfile=mpc832x_mds.dtb\0"						\
    ""
 
 #define CONFIG_NFSBOOTCOMMAND						\