X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8323ERDB.h;h=ea99aead456f35322b32db4d74150fd4fa002b6d;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=d32b14a105590429c4d564c0bce4b5f18d6948e2;hpb=ea818dbbcd59300b56014ac2d67798a54994eb9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index d32b14a..ea99aea 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -14,13 +14,10 @@
  */
 #define CONFIG_E300		1	/* E300 family */
 #define CONFIG_QE		1	/* Has QE */
-#define CONFIG_MPC83xx		1	/* MPC83xx family */
 #define CONFIG_MPC832x		1	/* MPC832x CPU specific */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
-#define CONFIG_PCI		1
-
 /*
  * System Clock Setup
  */
@@ -155,7 +152,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)	/* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)	/* Reserved for malloc */
 
 /*
@@ -211,7 +208,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -224,21 +220,14 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board EEPROM
@@ -265,7 +254,6 @@
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
@@ -313,7 +301,6 @@
 	#define CONFIG_ENV_SECT_SIZE	0x20000
 	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
@@ -333,20 +320,10 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ASKENV
 
 #if defined(CONFIG_PCI)
 	#define CONFIG_CMD_PCI
 #endif
-#if defined(CONFIG_SYS_RAMBOOT)
-	#undef CONFIG_CMD_SAVEENV
-	#undef CONFIG_CMD_LOADS
-#endif
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
@@ -355,7 +332,6 @@
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 
 #if (CONFIG_CMD_KGDB)
 	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
@@ -368,7 +344,6 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 				/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -377,6 +352,7 @@
  */
 					/* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -483,7 +459,6 @@
 
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
@@ -511,8 +486,6 @@
 
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		800000
-#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
-#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=" CONFIG_NETDEV "\0"					\