X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8323ERDB.h;h=977c041dca6e31f18f639e9f99534000e0bf2469;hb=29f8f58ff40c67f7f2e11afd1715173094e52ac2;hp=94c4c6b040e78570c250dfd55794c8838d8cde24;hpb=27f33e9f45ef7f9685cbdc65066a1828e85dde4f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 94c4c6b..977c041 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -323,8 +323,11 @@
 /*
  * Config on-board EEPROM
  */
-#define CFG_I2C_EEPROM_ADDR     0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR		0x50
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*
  * General PCI
@@ -341,7 +344,7 @@
 #define CFG_PCI1_IO_SIZE		0x04000000	/* 64M */
 
 #ifdef CONFIG_PCI
-
+#define CONFIG_PCI_SKIP_HOST_BRIDGE
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
@@ -465,6 +468,7 @@
 /*
  * MMU Setup
  */
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -549,6 +553,9 @@
 #define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
 
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CFG_I2C_MAC_OFFSET	0x7f00	/* MAC address offset in I2C EEPROM */
+
 #define CONFIG_IPADDR		10.0.0.2
 #define CONFIG_SERVERIP		10.0.0.1
 #define CONFIG_GATEWAYIP	10.0.0.1
@@ -562,7 +569,7 @@
 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
 #define CONFIG_FDTFILE		mpc832x_rdb.dtb
 
-#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200