X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8313ERDB.h;h=38a4a6220bf08b2beb2c88b8f2f2842ee85d7403;hb=c9032ce168c1344fe8ffe8604825ec343ec14adf;hp=07719e9265fde526677ee0a4ad275ac75908ac84;hpb=85b8c5c4bf80025de4632ae6c9a8a606e51508a4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 07719e9..38a4a62 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -14,16 +14,12 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1
-#define CONFIG_MPC83xx		1
 #define CONFIG_MPC831x		1
 #define CONFIG_MPC8313		1
 #define CONFIG_MPC8313ERDB	1
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
@@ -58,7 +54,6 @@
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_ELBC 1
 
@@ -83,7 +78,6 @@
 
 #define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
 
-#define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f */
 #define CONFIG_BOARD_EARLY_INIT_R		/* call board_early_init_r */
 
 #define CONFIG_SYS_IMMR		0xE0000000
@@ -241,7 +235,7 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)	/* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN	(512 * 1024)	/* Reserved for malloc */
 
 /*
@@ -268,16 +262,14 @@
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT			"nand0=e2800000.flash"
 #define MTDPARTS_DEFAULT		\
-	"mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+	"mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
 
-
 #define CONFIG_SYS_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE \
 				| BR_DECC_CHK_GEN	/* Use HW ECC */ \
 				| BR_PS_8		/* 8 bit port */ \
@@ -360,19 +352,12 @@
 
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
 #define CONFIG_MPC83XX_GPIO 1
-#define CONFIG_CMD_GPIO 1
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 
@@ -382,9 +367,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -410,7 +392,6 @@
 #define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
 
 /*
@@ -438,7 +419,6 @@
 #define TSEC2_PHYIDX		0
 #endif
 
-
 /* Options are: TSEC[0-1] */
 #define CONFIG_ETHPRIME			"TSEC1"
 
@@ -485,24 +465,11 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 #define CONFIG_CMDLINE_EDITING 1
 #define CONFIG_AUTO_COMPLETE	/* add autocompletion support   */
 
@@ -527,6 +494,7 @@
  */
 				/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
 
@@ -674,8 +642,6 @@
 
 				/* default location for tftp and bootm */
 #define CONFIG_LOADADDR		800000
-#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
-#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=" CONFIG_NETDEV "\0"					\