X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8308RDB.h;h=29561c41016cbb65c7d3cb157aa72e10cc46defa;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=d348ec9367636acc5924ce6fc40448bb06578e30;hpb=c4cb6e64bf068eaa1f7c96cb37da7ae6d40bbbff;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index d348ec9..29561c4 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com * - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -13,15 +12,8 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_MISC_INIT_R #ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_USE_PIO #endif @@ -36,92 +28,15 @@ #define CONFIG_VSC7385_ENET /* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz - * We choose the A type silicon as default, so the core is 400Mhz. - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_CORE_TO_CSB_3X1) -/* - * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits - * in 8308's HRCWH according to the manual, but original Freescale's - * code has them and I've expirienced some problems using the board - * with BDI3000 attached when I've tried to set these bits to zero - * (UART doesn't work after the 'reset run' command). - */ -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH (\ - SICRH_ESDHC_A_SD |\ - SICRH_ESDHC_B_SD |\ - SICRH_ESDHC_C_SD |\ - SICRH_GPIO_A_TSEC2 |\ - SICRH_GPIO_B_TSEC2_GTX_CLK125 |\ - SICRH_IEEE1588_A_GPIO |\ - SICRH_USB |\ - SICRH_GTM_GPIO |\ - SICRH_IEEE1588_B_GPIO |\ - SICRH_ETSEC2_CRS |\ - SICRH_GPIOSEL_1 |\ - SICRH_TMROBI_V3P3 |\ - SICRH_TSOBI1_V2P5 |\ - SICRH_TSOBI2_V2P5) /* 0x01b7d103 */ -#define CONFIG_SYS_SICRL (\ - SICRL_SPI_PF0 |\ - SICRL_UART_PF0 |\ - SICRL_IRQ_PF0 |\ - SICRL_I2C2_PF0 |\ - SICRL_ETSEC1_GTX_CLK125) /* 0x00000040 */ - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * SERDES */ #define CONFIG_FSL_SERDES #define CONFIG_FSL_SERDES1 0xe3000 /* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -207,39 +122,13 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -/* * FLASH on the Local Bus */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ - -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) + #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -253,45 +142,14 @@ */ #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit Port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) /* 0xFFFF8396 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - #ifdef CONFIG_VSC7385_ENET #define CONFIG_TSEC2 /* VSC7385 Base address on CS2 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8-bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xF0000801 */ -#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) /* 0xFFFE09FF */ -/* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -/* Access window size 128K */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 #define CONFIG_VSC7385_IMAGE_SIZE 8192 @@ -299,7 +157,6 @@ /* * Serial Port */ -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) @@ -368,7 +225,6 @@ /* * TSEC */ -#define CONFIG_TSEC_ENET /* TSEC ethernet support */ #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) #define CONFIG_SYS_TSEC2_OFFSET 0x25000 @@ -377,7 +233,6 @@ /* * TSEC ethernet configuration */ -#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2_NAME "eTSEC1" #define TSEC1_PHY_ADDR 2 @@ -393,12 +248,6 @@ /* * Environment */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -407,20 +256,14 @@ * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -437,52 +280,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* * Environment Configuration */