X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8308RDB.h;h=0f26467e2941bfd78a0760234f1dfd8bfc7b8e17;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=58fc0f8201ce279c986d516685148721d87e6ae8;hpb=0defddc851edfc34bcf3c3379fe74b11dc01a493;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 58fc0f8..0f26467 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -13,7 +13,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1 /* E300 family */
-#define CONFIG_MPC83xx		1 /* MPC83xx family */
 #define CONFIG_MPC830x		1 /* MPC830x family */
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_MPC8308RDB	1 /* MPC8308RDB board specific */
@@ -22,22 +21,10 @@
 
 #define CONFIG_MISC_INIT_R
 
-/* new uImage format support */
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -208,7 +195,7 @@
  */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
 
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN	(512 * 1024) /* Reserved for malloc */
 
 /*
@@ -314,7 +301,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -325,14 +311,6 @@
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -351,11 +329,7 @@
  * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins.
  */
 #ifdef CONFIG_MPC8XXX_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_USE_SPIFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
 #endif
 
 /*
@@ -386,12 +360,9 @@
 /* enable PCIE clock */
 #define CONFIG_SYS_SCCR_PCIEXP1CM	1
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
-#define CONFIG_PCI_PNP		/* do pci plug-and-play */
-
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
 
@@ -445,15 +416,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 
@@ -470,7 +433,6 @@
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -478,6 +440,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -536,11 +499,8 @@
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\