X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8266ADS.h;h=0474140fb38b490ad3d3a1d60dac0f71f152203c;hb=544aa66a6695790227613bf32bdf672143d5a1ad;hp=b0162c3971b240abf7c7b4d75e9760cd028c6bee;hpb=004eca0c9ba328de457d5dc9ef8805639dfef893;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index b0162c3..0474140 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -33,7 +33,7 @@
 /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!								      !!
    !!  This configuration requires JP3 to be in position 1-2 to work  !!
-   !!  To make it work for the default, the TEXT_BASE define in	      !!
+   !!  To make it work for the default, the CONFIG_SYS_TEXT_BASE define in	      !!
    !!  board/mpc8266ads/config.mk must be changed from 0xfe000000 to  !!
    !!  0xfff00000						      !!
    !!  The CONFIG_SYS_HRCW_MASTER define below must also be changed to match !!
@@ -53,6 +53,8 @@
 #define CONFIG_MPC8266ADS	1	/* ...on motorola ADS board	*/
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
+#define	CONFIG_SYS_TEXT_BASE	0xfe000000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 #define CONFIG_RESET_PHY_R	1	/* Call reset_phy()		*/
 
@@ -96,6 +98,10 @@
  * Port pins used for bit-banged MII communictions (if applicable).
  */
 #define MDIO_PORT	2	/* Port C */
+#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE	MDIO_DECLARE
+
 #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
 #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
 #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
@@ -116,8 +122,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Half duplex
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -376,9 +382,8 @@
 #define FETH_RST		0x04000004
 
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2)  */
@@ -415,10 +420,8 @@
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot	     */
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
 #endif