X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8260ADS.h;h=735cfaae5be33f6f0ff3da21442d401e2804842c;hb=9314cee6917444ab88bd4e758da7a30975120187;hp=bca207418cc9ffa88158f61332ec2f08d282c06f;hpb=c2d0ab4da856a28e4cb48c0835de3fc4179a91df;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index bca2074..735cfaa 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -101,8 +101,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
 #define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
@@ -198,59 +197,66 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_EXCLUDE		CFG_CMD_BEDBUG	| \
-				CFG_CMD_BMP	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DISPLAY | \
-				CFG_CMD_DOC	| \
-				CFG_CMD_DTT	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EXT2	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_FDC	| \
-				CFG_CMD_FDOS	| \
-				CFG_CMD_HWFLOW	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_MMC	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_PCMCIA	| \
-				CFG_CMD_REISER	| \
-				CFG_CMD_SCSI	| \
-				CFG_CMD_SPI	| \
-				CFG_CMD_SNTP	| \
-				CFG_CMD_UNIVERSE | \
-				CFG_CMD_USB	| \
-				CFG_CMD_VFD	| \
-				CFG_CMD_XIMG
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#if defined(CONFIG_OF_LIBFDT)
+#define OF_CPU			"cpu@0"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SDRAM
+
+#undef CONFIG_CMD_XIMG
 
 #if CONFIG_ADSTYPE == CFG_8272ADS
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-			         CFG_CMD_SDRAM	| \
-				 CFG_CMD_I2C	| \
-				 CFG_EXCLUDE	) )
+    #undef CONFIG_CMD_SDRAM
+    #undef CONFIG_CMD_I2C
+
 #elif CONFIG_ADSTYPE >= CFG_PQ2FADS
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_SDRAM	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_PCI	| \
-				 CFG_EXCLUDE	) )
+    #undef CONFIG_CMD_SDRAM
+    #undef CONFIG_CMD_I2C
+    #undef CONFIG_CMD_PCI
+
 #else
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CMD_CFG_PCI 	| \
-				 CFG_EXCLUDE 	) )
+    #undef CONFIG_CMD_PCI
+
 #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock2"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -268,7 +274,7 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
@@ -378,13 +384,13 @@
 #  define CFG_ENV_SECT_SIZE	0x40000
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
 #else
-#  define CFG_ENV_IS_IN_NVRAM	1
+#  define CONFIG_ENV_IS_IN_NVRAM	1
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
 #  define CFG_ENV_SIZE		0x200
 #endif /* CFG_RAMBOOT */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
@@ -397,9 +403,9 @@
 #define CFG_BCR			0x100C0000
 #define CFG_SIUMCR		0x0A200000
 #define CFG_SCCR		SCCR_DFBRG01
-#define CFG_BR0_PRELIM		CFG_FLASH_BASE | 0x00001801
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
 #define CFG_OR0_PRELIM		0xFF800876
-#define CFG_BR1_PRELIM		CFG_BCSR | 0x00001801
+#define CFG_BR1_PRELIM		(CFG_BCSR | 0x00001801)
 #define CFG_OR1_PRELIM		0xFFFF8010
 
 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
@@ -503,7 +509,7 @@
 #endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
 
 #if CONFIG_ADSTYPE == CFG_8272ADS
-#define CONFIG_HAS_ETH1	
+#define CONFIG_HAS_ETH1
 #endif
 
 #endif /* __CONFIG_H */