X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMIP405.h;h=3a1d4d93885b36fd91d0189d40eed21e3719987c;hb=d4db3b86a5e090e21db710bedbbe3e50d4c56428;hp=0757e67b57f4228fb9c0ff738dbcc2cdecec694a;hpb=858dbdf8412cefb6dbc4eed63dc3de9744578455;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 0757e67..3a1d4d9 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -17,12 +17,9 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_MIP405 1 /* ...on a MIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 -#define CONFIG_SYS_GENERIC_BOARD - /*********************************************************** * Note that it may also be a MIP405T board which is a subset of the * MIP405 @@ -38,7 +35,6 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - /* * BOOTP options */ @@ -47,32 +43,13 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII #define CONFIG_CMD_PCI -#define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SAVES -#define CONFIG_CMD_BSP - -#if !defined(CONFIG_MIP405T) - #define CONFIG_CMD_USB -#endif - -#define CONFIG_SYS_HUSH_PARSER /************************************************************** * I2C Stuff: * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address @@ -95,7 +72,6 @@ /* last 6 bits of the address */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CONFIG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */ #define CONFIG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */ @@ -110,11 +86,8 @@ /************************************************************** * Environment definitions **************************************************************/ -#define CONFIG_BAUDRATE 9600 /* STD Baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ #define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */ #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ @@ -123,19 +96,12 @@ #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_PREBOOT /*************************************************************** - * defines if the console is stored in the environment - ***************************************************************/ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */ -/*************************************************************** * defines if an overwrite_console function exists *************************************************************/ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_SYS_CONSOLE_INFO_QUIET /*************************************************************** * defines if the overwrite_console should be stored in the * environment **************************************************************/ -#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE /************************************************************** * loads config @@ -161,7 +127,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ #define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() @@ -185,10 +150,8 @@ #define PCI_HOST_FORCE 1 /* configure as pci host */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ -#define CONFIG_PCI_PNP /* pci plug-and-play */ /* resource configuration */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ @@ -276,7 +239,6 @@ /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ #define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */ -#define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_BOARD_EARLY_INIT_R /* Peripheral Bus Mapping */ @@ -287,7 +249,6 @@ #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 #define CONFIG_PORT_ADDR PER_PLD_ADDR + 5 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in On Chip SRAM) */ @@ -330,7 +291,7 @@ /************************************************************ * IDE/ATA stuff ************************************************************/ -#if defined(CONFIG_MIP405T) +#if defined(CONFIG_TARGET_MIP405T) #define CONFIG_SYS_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */ #else #define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ @@ -345,7 +306,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ #undef CONFIG_IDE_LED /* no led for ide supported */ #define CONFIG_IDE_RESET /* reset for ide supported... */ #define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ @@ -358,36 +318,19 @@ /************************************************************ * DISK Partition support ************************************************************/ -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION /* Experimental */ - -/************************************************************ - * Keyboard support - ************************************************************/ -#undef CONFIG_ISA_KEYBOARD /************************************************************ * Video support ************************************************************/ -#define CONFIG_VIDEO /*To enable video controller support */ -#define CONFIG_VIDEO_CT69000 -#define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_VIDEO_SW_CURSOR #undef CONFIG_VIDEO_ONBOARD /************************************************************ * USB support EXPERIMENTAL ************************************************************/ -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) #define CONFIG_USB_UHCI -#define CONFIG_USB_KEYBOARD -#define CONFIG_USB_STORAGE /* Enable needed helper functions */ -#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ #endif /************************************************************ * Debug support @@ -401,22 +344,4 @@ ************************************************************/ #define CONFIG_BZIP2 1 -/************************************************************ - * Ident - ************************************************************/ - -#define VERSION_TAG "released" -#if !defined(CONFIG_MIP405T) -#define CONFIG_ISO_STRING "MEV-10072-001" -#else -#define CONFIG_ISO_STRING "MEV-10082-001" -#endif - -#if !defined(CONFIG_BOOT_PCI) -#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG -#else -#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version" -#endif - - #endif /* __CONFIG_H */