X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMIP405.h;h=0d023ab9fbe29d566d1824f16f7dc81ca7871210;hb=842033e6964e9e5d34aca893c1845416dd8ac2cc;hp=a3869c8747bcb54bcc478b5ae56a23e136b941cd;hpb=1129b14e549c8629cbff8c19cb650cc431211868;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index a3869c8..0d023ab 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -35,6 +35,9 @@
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_MIP405		1	/* ...on a MIP405 board		*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 /***********************************************************
  * Note that it may also be a MIP405T board which is a subset of the
  * MIP405
@@ -84,14 +87,10 @@
 
 #if !defined(CONFIG_MIP405T)
     #define CONFIG_CMD_USB
-    #define CONFIG_CMD_DOC
 #endif
 
 
-#define CONFIG_NAND_LEGACY
-
 #define	 CONFIG_SYS_HUSH_PARSER
-#define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
  * I2C Stuff:
  * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -100,6 +99,7 @@
  ***************************************************************/
 
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
@@ -178,6 +178,12 @@
 #define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
 
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       916667
 
@@ -200,6 +206,7 @@
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* configure as pci-host	*/
 #define CONFIG_PCI_PNP			/* pci plug-and-play		*/
 					/* resource configuration	*/
@@ -232,11 +239,17 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
 
 /*
  * JFFS2 partitions
@@ -284,6 +297,7 @@
 #define FLASH_SIZE_PRELIM	 3  /* maximal flash FLASH size bank #0	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /* Peripheral Bus Mapping */
 #define PER_PLD_ADDR		0xF4000000 /* smallest window is 1MByte 0x10 0000*/
@@ -301,29 +315,15 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
-#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE	/* Size of On Chip SRAM	       */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 /* reserve some memory for POST and BOOT limit info */
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
 
-#ifdef  CONFIG_POST		/* reserve one word for POST Info */
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#endif
-
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
@@ -383,13 +383,6 @@
 #define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
- * Disk-On-Chip configuration
- ************************************************************/
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-/************************************************************
  * Keyboard support
  ************************************************************/
 #undef CONFIG_ISA_KEYBOARD
@@ -414,7 +407,7 @@
 #define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER		/* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER		/* needs stdio_deregister */
 #endif
 /************************************************************
  * Debug support