X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FMETROBOX.h;h=04ae4f883a64d824878064da486dea6839ca1acf;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=c0ddd45c0e44ebbe2f48e0abb2e58a63037c18f3;hpb=f82642e33899766892499b163e60560fbbf87773;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index c0ddd45..04ae4f8 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -109,6 +109,9 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
 #define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 #undef	CONFIG_SYS_DRAM_TEST			     /* Disable-takes long time!*/
 #define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
@@ -125,7 +128,6 @@
 #define CONFIG_SYS_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
 #define CONFIG_SYS_MONITOR_BASE       0xfff80000    /* start of monitor	*/
 #define CONFIG_SYS_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
-#define CONFIG_SYS_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
 #define CONFIG_SYS_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
 #define CONFIG_SYS_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
 
@@ -144,8 +146,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
@@ -153,7 +154,11 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
@@ -194,6 +199,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
 #undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
 #define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
 #define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
@@ -221,6 +227,7 @@
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/