X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM54455EVB.h;h=d73101f96c5e1a4f6b011a781f2802c4c9e0845d;hb=21bc1935b1a84176367af982f7f8da11c29cb2eb;hp=c5a0a0371d49a52c65e274e2eef1f8741f539ee6;hpb=86c2f1e75b3bb8f099a3f915a34cd96b0348376f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index c5a0a03..d73101f 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF54455 EVB board.
  *
  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -33,14 +32,10 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
@@ -70,7 +65,7 @@
 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-#define CONFIG_HOSTNAME		M54455EVB
+#define CONFIG_HOSTNAME		"M54455EVB"
 #ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
 #define	CONFIG_SYS_LOAD_ADDR2		0x40010013
@@ -146,20 +141,8 @@
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
-#define CONFIG_CF_SPI
 #define CONFIG_CF_DSPI
-#define CONFIG_HARD_SPI
 #define CONFIG_SYS_SBFHDR_SIZE		0x13
-#ifdef CONFIG_CMD_SPI
-
-#	define CONFIG_SYS_DSPI_CTAR0		(DSPI_CTAR_TRSZ(7) | \
-					 DSPI_CTAR_PCSSCK_1CLK | \
-					 DSPI_CTAR_PASC(0) | \
-					 DSPI_CTAR_PDT(0) | \
-					 DSPI_CTAR_CSSCK(0) | \
-					 DSPI_CTAR_ASC(0) | \
-					 DSPI_CTAR_DT(1))
-#endif
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
@@ -192,8 +175,6 @@
 
 #define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR		0xFC000000
@@ -257,9 +238,6 @@
  * Environment is not embedded in u-boot. First time runing may have env
  * crc error warning if there is no correct environment on the flash.
  */
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_ENV_SPI_CS		1
-#endif
 #undef CONFIG_ENV_OVERWRITE
 
 /*-----------------------------------------------------------------------
@@ -289,16 +267,12 @@
 #	define CONFIG_ENV_SECT_SIZE	0x20000
 #endif
 
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 
-#	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #	define CONFIG_SYS_FLASH_CHECKSUM
 #	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 #	define CONFIG_FLASH_CFI_LEGACY