X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM54455EVB.h;h=b623c33318aa918391f04d6b3d780955da51918d;hb=26750c8aee2383a026e0cf89e9310628d3a5a6a0;hp=6620f03d3d66c8d902fa47931b770638d2e9912a;hpb=2fd0aad443c966ce62008225e57b18e2dcf4e330;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6620f03..b623c33 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -39,9 +39,8 @@ #define CONFIG_M54455EVB /* M54455EVB board */ #define CONFIG_MCFUART -#define CFG_UART_PORT (0) +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG @@ -76,6 +75,8 @@ #undef CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF #undef CONFIG_CMD_LOADB #undef CONFIG_CMD_LOADS @@ -83,17 +84,16 @@ /* Network configuration */ #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 # define CONFIG_MII 1 # define CONFIG_MII_INIT 1 -# define CFG_DISCOVER_PHY -# define CFG_RX_ETH_BUFFER 8 -# define CFG_FAULT_ECHO_LINK_DOWN - -# define CFG_FEC0_PINMUX 0 -# define CFG_FEC1_PINMUX 0 -# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE -# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define CONFIG_SYS_DISCOVER_PHY +# define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +# define CONFIG_SYS_FEC0_PINMUX 0 +# define CONFIG_SYS_FEC1_PINMUX 0 +# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 # define CONFIG_HAS_ETH1 @@ -108,30 +108,57 @@ # define CONFIG_GATEWAYIP 192.162.1.1 # define CONFIG_OVERWRITE_ETHADDR_ONCE -/* If CFG_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CFG_DISCOVER_PHY +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET # else -# ifndef CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FAULT_ECHO_LINK_DOWN +# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # endif -# endif /* CFG_DISCOVER_PHY */ +# endif /* CONFIG_SYS_DISCOVER_PHY */ #endif #define CONFIG_HOSTNAME M54455EVB +#ifdef CONFIG_SYS_STMICRO_BOOT +/* ST Micro serial flash */ +#define CONFIG_SYS_LOAD_ADDR2 0x40010013 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ - "loadaddr=40010000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ + "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "sbfhdr=sbfhdr.bin\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${sbfhdr};" \ + "tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ "upd=run load; run prog\0" \ - "prog=prot off 4000000 402ffff;" \ - "era 4000000 402ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=sf probe 0:1 1000000 3;" \ + "sf erase 0 30000;" \ + "sf write ${loadaddr} 0 0x30000;" \ "save\0" \ "" +#else +/* Atmel and Intel */ +#ifdef CONFIG_SYS_ATMEL_BOOT +# define CONFIG_SYS_UBOOT_END 0x0403FFFF +#elif defined(CONFIG_SYS_INTEL_BOOT) +# define CONFIG_SYS_UBOOT_END 0x3FFFF +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${uboot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " " MK_STR(CONFIG_SYS_UBOOT_END) ";" \ + "era " MK_STR(CONFIG_SYS_FLASH_BASE) " " \ + MK_STR(CONFIG_SYS_UBOOT_END) ";" \ + "cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " ${filesize}; save\0" \ + "" +#endif /* ATA configuration */ #define CONFIG_ISO_PARTITION @@ -141,22 +168,21 @@ #define CONFIG_ATAPI #undef CONFIG_LBA48 -#define CFG_IDE_MAXBUS 1 -#define CFG_IDE_MAXDEVICE 2 +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CFG_ATA_BASE_ADDR 0x90000000 -#define CFG_ATA_IDE0_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0 -#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ -#define CFG_ATA_STRIDE 4 /* Interval between registers */ -#define _IO_BASE 0 +#define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ /* Realtime clock */ #define CONFIG_MCFRTC #undef RTC_DEBUG -#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) +#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) /* Timer */ #define CONFIG_MCFTMR @@ -166,14 +192,28 @@ #define CONFIG_FSL_I2C #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_OFFSET 0x58000 -#define CFG_IMMR CFG_MBAR +#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* DSPI and Serial Flash */ +#define CONFIG_CF_SPI #define CONFIG_CF_DSPI -#define CONFIG_SERIAL_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_SYS_SBFHDR_SIZE 0x13 +#ifdef CONFIG_CMD_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_STMICRO + +# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(1)) +#endif /* PCI */ #ifdef CONFIG_CMD_PCI @@ -181,51 +221,51 @@ #define CONFIG_PCI_PNP 1 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 -#define CFG_PCI_CACHE_LINE_SIZE 4 +#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 -#define CFG_PCI_MEM_BUS 0xA0000000 -#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS -#define CFG_PCI_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 +#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS +#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 -#define CFG_PCI_IO_BUS 0xB1000000 -#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS -#define CFG_PCI_IO_SIZE 0x01000000 +#define CONFIG_SYS_PCI_IO_BUS 0xB1000000 +#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 -#define CFG_PCI_CFG_BUS 0xB0000000 -#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS -#define CFG_PCI_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 +#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS +#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 #endif /* FPGA - Spartan 2 */ /* experiment -#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA CONFIG_SYS_SPARTAN3 #define CONFIG_FPGA_COUNT 1 -#define CFG_FPGA_PROG_FEEDBACK -#define CFG_FPGA_CHECK_CTRLC +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_CHECK_CTRLC */ /* Input, PCI, Flexbus, and VCO */ #define CONFIG_EXTRA_CLOCK -#define CONFIG_PRAM 512 /* 512 KB */ +#define CONFIG_PRAM 2048 /* 2048 KB */ -#define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 -#define CFG_MBAR 0xFC000000 +#define CONFIG_SYS_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -236,34 +276,42 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x80000000 -#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ -#define CFG_INIT_RAM_CTRL 0x221 -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_BASE1 0x48000000 -#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ -#define CFG_SDRAM_CFG1 0x65311610 -#define CFG_SDRAM_CFG2 0x59670000 -#define CFG_SDRAM_CTRL 0xEA0B2000 -#define CFG_SDRAM_EMOD 0x40010000 -#define CFG_SDRAM_MODE 0x00010033 - -#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 -#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) - -#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) -#define CFG_BOOTPARAMS_LEN 64*1024 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_BASE1 0x48000000 +#define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_CFG1 0x65311610 +#define CONFIG_SYS_SDRAM_CFG2 0x59670000 +#define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 +#define CONFIG_SYS_SDRAM_EMOD 0x40010000 +#define CONFIG_SYS_SDRAM_MODE 0x00010033 +#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) + +#ifdef CONFIG_CF_SBF +# define CONFIG_SERIAL_BOOT +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) +#else +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +/* Reserve 256 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* * For booting Linux, the board info and command line data @@ -271,107 +319,111 @@ * the maximum mapped by the Linux kernel during initialization ?? */ /* Initial Memory map for Linux */ -#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash +/* + * Configuration for environment + * Environment is not embedded in u-boot. First time runing may have env + * crc error warning if there is no correct environment on the flash. */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OVERWRITE 1 -#undef CFG_ENV_IS_EMBEDDED +#ifdef CONFIG_CF_SBF +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_CS 1 +#else +# define CONFIG_ENV_IS_IN_FLASH 1 +#endif +#undef CONFIG_ENV_OVERWRITE /*----------------------------------------------------------------------- * FLASH organization */ -#ifdef CFG_ATMEL_BOOT -# define CFG_FLASH_BASE CFG_CS0_BASE -# define CFG_FLASH0_BASE CFG_CS0_BASE -# define CFG_FLASH1_BASE CFG_CS1_BASE -# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) -# define CFG_ENV_SECT_SIZE 0x2000 -#else -# define CFG_FLASH_BASE CFG_CS0_BASE -# define CFG_FLASH0_BASE CFG_CS0_BASE -# define CFG_FLASH1_BASE CFG_CS1_BASE -# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) -# define CFG_ENV_SECT_SIZE 0x20000 +#ifdef CONFIG_SYS_STMICRO_BOOT +# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE +# define CONFIG_ENV_OFFSET 0x30000 +# define CONFIG_ENV_SIZE 0x2000 +# define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#ifdef CONFIG_SYS_ATMEL_BOOT +# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +# define CONFIG_ENV_SIZE 0x2000 +# define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#ifdef CONFIG_SYS_INTEL_BOOT +# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE +# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +# define CONFIG_ENV_SIZE 0x2000 +# define CONFIG_ENV_SECT_SIZE 0x20000 #endif -/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system - keep reset. */ -#undef CFG_FLASH_CFI -#ifdef CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_FLASH_CFI_DRIVER 1 -# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT -# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -# define CFG_FLASH_CHECKSUM -# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } - -#else - -# define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ - -# define CFG_ATMEL_REGION 4 -# define CFG_ATMEL_TOTALSECT 11 -# define CFG_ATMEL_SECT {1, 2, 1, 7} -# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} -# define CFG_INTEL_SECT 137 - -/* max number of sectors on one chip */ -# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) -# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ -# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ -# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -# define CFG_FLASH_CHECKSUM - -#ifdef CONFIG_SERIAL_FLASH -# define CFG_FLASH2_BASE 0x01000000 -# define CFG_STM_SECT 32 -# define CFG_STM_SECTSZ 0x10000 - -# undef CFG_FLASH_ERASE_TOUT -# define CFG_FLASH_ERASE_TOUT 20000 - -# define SER_WREN 0x06 -# define SER_WRDI 0x04 -# define SER_RDID 0x9F -# define SER_RDSR 0x05 -# define SER_WRSR 0x01 -# define SER_READ 0x03 -# define SER_F_READ 0x0B -# define SER_PAGE_PROG 0x02 -# define SER_SECT_ERASE 0xD8 -# define SER_BULK_ERASE 0xC7 -# define SER_DEEP_PWRDN 0xB9 -# define SER_RES 0xAB +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT +# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CONFIG_SYS_FLASH_CHECKSUM +# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } +# define CONFIG_FLASH_CFI_LEGACY + +#ifdef CONFIG_FLASH_CFI_LEGACY +# define CONFIG_SYS_ATMEL_REGION 4 +# define CONFIG_SYS_ATMEL_TOTALSECT 11 +# define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} +# define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} #endif - #endif /* * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ -#ifdef CFG_ATMEL_BOOT +#ifdef CONFIG_CMD_JFFS2 +#ifdef CF_STMICRO_BOOT # define CONFIG_JFFS2_DEV "nor1" # define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) -#else +# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) +#endif +#ifdef CONFIG_SYS_ATMEL_BOOT +# define CONFIG_JFFS2_DEV "nor1" +# define CONFIG_JFFS2_PART_SIZE 0x01000000 +# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) +#endif +#ifdef CONFIG_SYS_INTEL_BOOT # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) -# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) +# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) +#endif #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) /*----------------------------------------------------------------------- * Memory bank definitions @@ -385,38 +437,38 @@ * CS5 - Available */ -#ifdef CFG_ATMEL_BOOT +#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) /* Atmel Flash */ -#define CFG_CS0_BASE 0x04000000 -#define CFG_CS0_MASK 0x00070001 -#define CFG_CS0_CTRL 0x00001140 +#define CONFIG_SYS_CS0_BASE 0x04000000 +#define CONFIG_SYS_CS0_MASK 0x00070001 +#define CONFIG_SYS_CS0_CTRL 0x00001140 /* Intel Flash */ -#define CFG_CS1_BASE 0x00000000 -#define CFG_CS1_MASK 0x01FF0001 -#define CFG_CS1_CTRL 0x00000D60 +#define CONFIG_SYS_CS1_BASE 0x00000000 +#define CONFIG_SYS_CS1_MASK 0x01FF0001 +#define CONFIG_SYS_CS1_CTRL 0x00000D60 -#define CFG_ATMEL_BASE CFG_CS0_BASE +#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE #else /* Intel Flash */ -#define CFG_CS0_BASE 0x00000000 -#define CFG_CS0_MASK 0x01FF0001 -#define CFG_CS0_CTRL 0x00000D60 +#define CONFIG_SYS_CS0_BASE 0x00000000 +#define CONFIG_SYS_CS0_MASK 0x01FF0001 +#define CONFIG_SYS_CS0_CTRL 0x00000D60 /* Atmel Flash */ -#define CFG_CS1_BASE 0x04000000 -#define CFG_CS1_MASK 0x00070001 -#define CFG_CS1_CTRL 0x00001140 +#define CONFIG_SYS_CS1_BASE 0x04000000 +#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CONFIG_SYS_CS1_CTRL 0x00001140 -#define CFG_ATMEL_BASE CFG_CS1_BASE +#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE #endif /* CPLD */ -#define CFG_CS2_BASE 0x08000000 -#define CFG_CS2_MASK 0x00070001 -#define CFG_CS2_CTRL 0x003f1140 +#define CONFIG_SYS_CS2_BASE 0x08000000 +#define CONFIG_SYS_CS2_MASK 0x00070001 +#define CONFIG_SYS_CS2_CTRL 0x003f1140 /* FPGA */ -#define CFG_CS3_BASE 0x09000000 -#define CFG_CS3_MASK 0x00070001 -#define CFG_CS3_CTRL 0x00000020 +#define CONFIG_SYS_CS3_BASE 0x09000000 +#define CONFIG_SYS_CS3_MASK 0x00070001 +#define CONFIG_SYS_CS3_CTRL 0x00000020 #endif /* _M54455EVB_H */