X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM54451EVB.h;h=2bd0e6223172aad6ab7de211f405278bde6cf4f9;hb=6760cef3856b12d6d3bb09ee58733ed3acaa82aa;hp=7faa180cd3d5011e634164a49f88cb7a4029bfc5;hpb=432e39806805c46d583e75e8dd2f7b71cc6089c1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 7faa180..2bd0e62 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF54451 EVB board.
  *
  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -33,14 +32,10 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
@@ -67,7 +62,7 @@
 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-#define CONFIG_HOSTNAME		M54451EVB
+#define CONFIG_HOSTNAME		"M54451EVB"
 #ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
 #define	CONFIG_SYS_LOAD_ADDR2		0x40010007
@@ -119,32 +114,15 @@
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
-#define CONFIG_CF_SPI
 #define CONFIG_CF_DSPI
 #define CONFIG_SERIAL_FLASH
-#define CONFIG_HARD_SPI
 #define CONFIG_SYS_SBFHDR_SIZE		0x7
-#ifdef CONFIG_CMD_SPI
-
-#	define CONFIG_SYS_DSPI_CTAR0	(DSPI_CTAR_TRSZ(7) | \
-					 DSPI_CTAR_PCSSCK_1CLK | \
-					 DSPI_CTAR_PASC(0) | \
-					 DSPI_CTAR_PDT(0) | \
-					 DSPI_CTAR_CSSCK(0) | \
-					 DSPI_CTAR_ASC(0) | \
-					 DSPI_CTAR_DT(1))
-#	define CONFIG_SYS_DSPI_CTAR1	(CONFIG_SYS_DSPI_CTAR0)
-#	define CONFIG_SYS_DSPI_CTAR2	(CONFIG_SYS_DSPI_CTAR0)
-#endif
 
 /* Input, PCI, Flexbus, and VCO */
 #define CONFIG_EXTRA_CLOCK
 
 #define CONFIG_PRAM			2048	/* 2048 KB */
 
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
@@ -208,7 +186,6 @@
  * crc error warning if there is no correct environment on the flash.
  */
 #if defined(CONFIG_SYS_STMICRO_BOOT)
-#	define CONFIG_ENV_SPI_CS		1
 #	define CONFIG_ENV_OFFSET		0x20000
 #	define CONFIG_ENV_SIZE		0x2000
 #	define CONFIG_ENV_SECT_SIZE	0x10000
@@ -222,16 +199,12 @@
 /* FLASH organization */
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 
-#	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #	define CONFIG_SYS_FLASH_CHECKSUM
 #	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }