X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5373EVB.h;h=b7906013e09eee36878e8717ee57f1f08ee65b8b;hb=5fec3c853d5e6b998db66f586871839c408195a3;hp=b85e0f088f343181af19d8d0f8729c719b7f04d9;hpb=ec7483e34ea932fb68267dc0b1de30be51f271c9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index b85e0f0..b790601 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF5373 FireEngine board.
  *
  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -14,30 +13,24 @@
 #ifndef _M5373EVB_H
 #define _M5373EVB_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options
  * (easy to change)
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */
 
 #define CONFIG_SYS_UNIFY_CACHE
 
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#	define CONFIG_SYS_FEC0_PINMUX		0
-#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
-#	define MCFFEC_TOUT_LOOP		50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
@@ -54,15 +47,8 @@
 
 /* Timer */
 #define CONFIG_MCFTMR
-#undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_UDP_CHECKSUM
 
@@ -73,7 +59,7 @@
 #	define CONFIG_GATEWAYIP	192.162.1.1
 #endif				/* FEC_ENET */
 
-#define CONFIG_HOSTNAME		M5373EVB
+#define CONFIG_HOSTNAME		"M5373EVB"
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"			\
 	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"	\
@@ -87,18 +73,6 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-
-#ifdef CONFIG_CMD_KGDB
-#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-#define CONFIG_SYS_LOAD_ADDR		0x40010000
 
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
@@ -134,14 +108,10 @@
 #define CONFIG_SYS_SDRAM_EMOD		0x40010000
 #define CONFIG_SYS_SDRAM_MODE		0x018D0000
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
-#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -154,14 +124,11 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
-#	define CONFIG_FLASH_CFI_DRIVER	1
 #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
 #ifdef CONFIG_NANDFLASH_SIZE
@@ -170,10 +137,6 @@
 #	define CONFIG_SYS_NAND_SIZE		1
 #	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #	define NAND_ALLOW_ERASE_ALL	1
-#	define CONFIG_JFFS2_NAND	1
-#	define CONFIG_JFFS2_DEV		"nand0"
-#	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
-#	define CONFIG_JFFS2_PART_OFFSET	0x00000000
 #endif
 
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
@@ -181,17 +144,14 @@
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SECT_SIZE	0x2000
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)