X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5275EVB.h;h=99412aabdec9c947cf19d55efd71e0796f25e1f3;hb=2f57139c211d193debddd25f45c02b738cefd871;hp=e9fcb5dfbc4eaacaf17228126e9a17929e1f5b08;hpb=c59afcff8a4ef087136e8a0ad7e2c587c32baf51;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index e9fcb5d..99412aa 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -21,9 +21,6 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
 /* Configuration for environment
@@ -34,55 +31,23 @@
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /* Available command configuration */
 
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_MII_INIT		1
 #define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FEC0_PINMUX		0
-#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
-#define CONFIG_SYS_FEC1_PINMUX		0
-#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
-#define MCFFEC_TOUT_LOOP	50000
-#define CONFIG_HAS_ETH1
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #ifndef CONFIG_SYS_DISCOVER_PHY
 #define FECDUPLEX		FULL
 #define FECSPEED		_100BASET
-#else
-#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#endif
 #endif
 #endif
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
-#define CONFIG_SYS_LOAD_ADDR		0x800000
-
-#define CONFIG_BOOTCOMMAND	"bootm ffe40000"
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_RETRY_COUNT	5
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif				/* FEC_ENET */
 
@@ -125,15 +90,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -146,7 +103,6 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
@@ -155,7 +111,6 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)