X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5275EVB.h;h=981670ac069bde2084da8670c2eb7b494a408a52;hb=ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af;hp=1f3539e8343d0c3035b22736073c502e6eafee3d;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1f3539e..981670a 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -55,7 +55,6 @@
 #define CONFIG_ENV_OFFSET		0x4000
 #define CONFIG_ENV_SECT_SIZE	0x2000
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_IS_EMBEDDED	1
 #else
 #define CONFIG_ENV_ADDR		0xffe04000
 #define CONFIG_ENV_SECT_SIZE	0x2000
@@ -73,6 +72,7 @@
 /* Available command configuration */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
@@ -122,11 +122,6 @@
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
-#ifdef CONFIG_MCFFEC
-#define CONFIG_ETHADDR		00:06:3b:01:41:55
-#define CONFIG_ETH1ADDR		00:0e:0c:bc:e5:60
-#endif
-
 #define CONFIG_SYS_PROMPT		"-> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 
@@ -146,6 +141,23 @@
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000
 
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_RETRY_COUNT	5
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=10000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${uboot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off ffe00000 ffe3ffff;"	\
+	"era ffe00000 ffe3ffff;"		\
+	"cp.b ${loadaddr} ffe00000 ${filesize};"\
+	"save\0"				\
+	""
+
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			150000000
 
@@ -173,7 +185,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_SYS_MONITOR_BASE	0x20000
@@ -190,7 +202,8 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial mmap for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
@@ -208,16 +221,29 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
+					 CF_CACR_DISD | CF_CACR_INVI | \
+					 CF_CACR_CEIB | CF_CACR_DCM | \
+					 CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_AR0_PRELIM		(CONFIG_SYS_FLASH_BASE >> 16)
-#define CONFIG_SYS_CR0_PRELIM		0x1980
-#define CONFIG_SYS_MR0_PRELIM		0x001F0001
+#define CONFIG_SYS_CS0_BASE		0xffe00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
-#define CONFIG_SYS_AR1_PRELIM		0x3000
-#define CONFIG_SYS_CR1_PRELIM		0x1900
-#define CONFIG_SYS_MR1_PRELIM		0x00070001
+#define CONFIG_SYS_CS1_BASE		0x30000000
+#define CONFIG_SYS_CS1_CTRL		0x00001900
+#define CONFIG_SYS_CS1_MASK		0x00070001
 
 /*-----------------------------------------------------------------------
  * Port configuration