X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5275EVB.h;h=80d079a4899598eba06b1731041804c68600fe18;hb=5d68d2f41df5099f890052756f14f5a810f34312;hp=38e785c0682367d24e554be7f198859740a30d49;hpb=c4cb6e64bf068eaa1f7c96cb37da7ae6d40bbbff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 38e785c..80d079a 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Motorola MC5275EVB board.
  *
@@ -6,8 +7,6 @@
  *
  * Based off of M5272C3 board code by Josef Baumgartner
  * <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -22,81 +21,24 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#else
-#define CONFIG_ENV_ADDR		0xffe04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#endif
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
 /* Available command configuration */
 
-#define CONFIG_MCFFEC
-#ifdef CONFIG_MCFFEC
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FEC0_PINMUX		0
-#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
-#define CONFIG_SYS_FEC1_PINMUX		0
-#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
-#define MCFFEC_TOUT_LOOP	50000
-#define CONFIG_HAS_ETH1
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#ifndef CONFIG_SYS_DISCOVER_PHY
-#define FECDUPLEX		FULL
-#define FECSPEED		_100BASET
-#else
-#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#endif
-#endif
-#endif
-
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
-#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x800000
-
-#define CONFIG_BOOTCOMMAND	"bootm ffe40000"
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_RETRY_COUNT	5
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif				/* FEC_ENET */
 
@@ -127,8 +69,6 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -139,15 +79,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -155,23 +87,17 @@
  * the maximum mapped by the Linux kernel during initialization ??
  */
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER	1
 #define CONFIG_SYS_FLASH_SIZE		0x200000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)