X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5275EVB.h;h=41974cff410da71a1045b8be5f637c524982f0c3;hb=0a69d6afcab9b2fa364cd78aa67340185c5f75a0;hp=e9057ffd95512db991afd3df65382200357dc458;hpb=a958c58571ef2af420f482f47a34924d75510065;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index e9057ff..41974cf 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,9 +21,7 @@ * (easy to change) */ -#define CONFIG_MCFTMR - -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -35,30 +33,10 @@ /* Available command configuration */ -#ifdef CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -#ifndef CONFIG_SYS_DISCOVER_PHY -#define FECDUPLEX FULL -#define FECSPEED _100BASET -#else -#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#endif -#endif -#endif - /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) -#define CONFIG_SYS_I2C_PINMUX_SET (0x000F) - -#ifdef CONFIG_MCFFEC -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* FEC_ENET */ +#define CFG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) +#define CFG_SYS_I2C_PINMUX_CLR (0xFFF0) +#define CFG_SYS_I2C_PINMUX_SET (0x000F) #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -72,7 +50,7 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 150000000 +#define CFG_SYS_CLK 150000000 /* * Low Level Configuration Settings @@ -80,63 +58,49 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE - -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - -#define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 +#define CFG_SYS_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 -#define CONFIG_SYS_FLASH_SIZE 0x200000 +#define CFG_SYS_FLASH_SIZE 0x200000 /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -144,17 +108,12 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 - -#define CONFIG_SYS_CS1_BASE 0x30000000 -#define CONFIG_SYS_CS1_CTRL 0x00001900 -#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CFG_SYS_CS0_BASE 0xffe00000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x001F0001 -/*----------------------------------------------------------------------- - * Port configuration - */ -#define CONFIG_SYS_FECI2C 0x0FA0 +#define CFG_SYS_CS1_BASE 0x30000000 +#define CFG_SYS_CS1_CTRL 0x00001900 +#define CFG_SYS_CS1_MASK 0x00070001 #endif /* _M5275EVB_H */