X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5275EVB.h;h=35048613b9f7e38831149a2469c19a7665a4454d;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=1babb72fd0ef529162e8fcf70612fb5616ae1487;hpb=4bafceff0e9e5a36908031e41c69a6b37e82da58;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1babb72..3504861 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Motorola MC5275EVB board.
  *
@@ -6,8 +7,6 @@
  *
  * Based off of M5272C3 board code by Josef Baumgartner
  * <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -30,13 +29,6 @@
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#else
-#define CONFIG_ENV_ADDR		0xffe04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#endif
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
@@ -49,18 +41,11 @@
 
 /* Available command configuration */
 
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_SYS_RX_ETH_BUFFER	8
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FEC0_PINMUX		0
-#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
-#define CONFIG_SYS_FEC1_PINMUX		0
-#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
-#define MCFFEC_TOUT_LOOP	50000
 #define CONFIG_HAS_ETH1
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #ifndef CONFIG_SYS_DISCOVER_PHY
@@ -74,21 +59,12 @@
 #endif
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
-#define CONFIG_SYS_LOAD_ADDR		0x800000
-
 #define CONFIG_BOOTCOMMAND	"bootm ffe40000"
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
 
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_NET_RETRY_COUNT	5
@@ -141,7 +117,6 @@
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
@@ -159,14 +134,11 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER	1
 #define CONFIG_SYS_FLASH_SIZE		0x200000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)