X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5272C3.h;h=421e267be6f775e317da147df89b9d3c0bda04f9;hb=143a365a5b3d3d4cd59769124649f3a08677eb8b;hp=4f5e6092554dd4d34d80eb59c7fbb61634fe84d5;hpb=ef2f0d323652c1162937df668b33b3bfe0ca3904;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 4f5e609..421e267 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -16,12 +16,9 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCFTMR
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
 
 #undef CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
@@ -34,27 +31,12 @@
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
@@ -78,9 +60,6 @@
 	"save\0"				\
 	""
 
-#define CONFIG_SYS_LOAD_ADDR		0x20000
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
 #define CONFIG_SYS_CLK			66000000
 
 /*
@@ -116,7 +95,6 @@
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
@@ -132,14 +110,12 @@
 #ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -155,26 +131,6 @@
 					 CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
-#define CONFIG_SYS_BR1_PRELIM		0
-#define CONFIG_SYS_OR1_PRELIM		0
-#define CONFIG_SYS_BR2_PRELIM		0x30000001
-#define CONFIG_SYS_OR2_PRELIM		0xFFF80000
-#define CONFIG_SYS_BR3_PRELIM		0
-#define CONFIG_SYS_OR3_PRELIM		0
-#define CONFIG_SYS_BR4_PRELIM		0
-#define CONFIG_SYS_OR4_PRELIM		0
-#define CONFIG_SYS_BR5_PRELIM		0
-#define CONFIG_SYS_OR5_PRELIM		0
-#define CONFIG_SYS_BR6_PRELIM		0
-#define CONFIG_SYS_OR6_PRELIM		0
-#define CONFIG_SYS_BR7_PRELIM		0x00000701
-#define CONFIG_SYS_OR7_PRELIM		0xFFC0007C
-
-/*-----------------------------------------------------------------------
  * Port configuration
  */
 #define CONFIG_SYS_PACNT		0x00000000