X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2FM5253DEMO.h;h=c27f0a5a2d72b48ed34921a4d6751a2b67efc88a;hb=c4408291bfff9622f2d3817a13c997debd0e8200;hp=b9f30ccc0ad9e8d486b6871e9a5308f18ac71cfa;hpb=844fb498cc978608ec88bdf29913c0d46c85bfff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index b9f30cc..c27f0a5 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -1,56 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * Hayden Fraser (Hayden.Fraser@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _M5253DEMO_H
 #define _M5253DEMO_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_MCFTMR
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG		/* disable watchdog */
-
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#	define CONFIG_ENV_OFFSET		0x4000
-#	define CONFIG_ENV_SECT_SIZE	0x1000
-#else
-#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
-#	define CONFIG_ENV_SECT_SIZE	0x1000
-#endif
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text*);
 
-/*
- * Command line configuration.
- */
-
 #ifdef CONFIG_IDE
 /* ATA */
-#	define CONFIG_IDE_RESET		1
 #	define CONFIG_IDE_PREINIT	1
-#	define CONFIG_ATAPI
 #	undef CONFIG_LBA48
-
-#	define CONFIG_SYS_IDE_MAXBUS		1
-#	define CONFIG_SYS_IDE_MAXDEVICE	2
-
-#	define CONFIG_SYS_ATA_BASE_ADDR	(CONFIG_SYS_MBAR2 + 0x800)
-#	define CONFIG_SYS_ATA_IDE0_OFFSET	0
-
-#	define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
-#	define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#	define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
-#	define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
 #endif
 
 #define CONFIG_DRIVER_DM9000
@@ -80,21 +54,10 @@
 #define CONFIG_HOSTNAME		"M5253DEMO"
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000280
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(*(u32 *) (CONFIG_SYS_MBAR+0x19C))
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFFFE7FF)
 #define CONFIG_SYS_I2C_PINMUX_SET	(0)
 
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-
 #undef CONFIG_SYS_PLL_BYPASS		/* bypass PLL for test purpose */
 #define CONFIG_SYS_FAST_CLK
 #ifdef CONFIG_SYS_FAST_CLK
@@ -137,7 +100,6 @@
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN		0x40000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
 #define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
@@ -150,21 +112,18 @@
 
 /* FLASH organization */
 #define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
 #define FLASH_SST6401B		0x200
 #define SST_ID_xF6401B		0x236D236D
 
-#undef CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 /*
  * Unable to use CFI driver, due to incompatible sector erase command by SST.
  * Amd/Atmel use 0x30 for sector erase, SST use 0x50.
  * 0x30 is block erase in SST
  */
-#	define CONFIG_FLASH_CFI_DRIVER	1
 #	define CONFIG_SYS_FLASH_SIZE		0x800000
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #	define CONFIG_FLASH_CFI_LEGACY
@@ -175,7 +134,6 @@
 #endif
 
 /* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)